Anderic GK-R Keypad Garage Door Opener Remote Control for Genie Intellicode

The Anderic GK-R is a wireless keypad for Genie Intellicode garage door openers.

Specifications

• Radio frequency (RF)
• Batteries: 2 AAA (not included)

Good to Know

• It is for Genie Intellicode openers only.
• Not for MyQ-only or other brands and types not listed here.

Setup / Pairing

1. Open the battery compartment, insert the battery (not included), then reinstall the compartment door.
2. Make sure the number pad backlight is off. Press 3-5-7 in sequence, then press the PROGRAM key. The LED blinks once per second.
3. Enter a personal PIN of 3 to 8 digits, then press the PROGRAM key. The LED blinks twice and shuts off.
4. Put the opener into programming mode. On a current Genie opener, press and hold the program button until the round LED turns blue, then release it; the round LED goes out and the long LED flashes purple. On an opener or external receiver made between 1995 and 2011, press and release the Learn Code button once; the red LED flashes.
5. The opener stays in programming mode for about 30 seconds. With the keypad backlight off, enter your PIN, then press the UP/DOWN key 3 to 4 times slowly until the opener operates.
6. Keep the garage door clear of people and objects while programming and testing.

What's in the Box

• 1 Anderic GK-R remote
• Batteries not included

Works with Genie Intellicode openers (Genie GK-R keypad).