Anderic Substitute for Lasko 2033673 Air Logic Upright Fan Remote Control for AC600 Bladeless Tower Fan

The Anderic RRFAN100A is an infrared (IR) remote control that is programmed to your Lasko model. This one is for the Lasko 2033673 remote used with the AC600 bladeless tower fan.

Specifications

• Shipped remote: Anderic RRFAN100A
• Infrared (IR) remote: aim it at the fan; a clear line of sight is needed
• Batteries: 2 AAA (not included)

Good to Know

• It must be programmed to your model by holding two assigned keys; it is not ready to use out of the box.
• Button names and layout may differ from your original. Compare your original's buttons before ordering.

Setup / Pairing

1. Insert the batteries, matching the polarity marks.
2. Find model 2033673 in the chart in the RRFAN100A user guide and note the two keys assigned to it.
3. Press and hold those two keys together for about 2 seconds until the indicator light flashes three times.
4. Three flashes mean programming is complete. Point the remote at the fan to use it; infrared remotes are not paired.

Troubleshooting

• Make sure you identified the model of your old remote correctly and used the two keys assigned to it.
• Hold the two assigned keys together for about 2 seconds until the light flashes three times; if it does not flash, release and try again.
• Check the battery and point the remote straight at the device with nothing in the way.
• Not every key has a function on every model; use the key assigned to that function.

What's in the Box

• 1 Anderic RRFAN100A remote
• Batteries not included

Compatible Models

• Lasko 2033673
• Supplied with: AC600 Air Logic Bladeless Tower Fan

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.