Hisense CT-95018 FIRE TV Voice Remote with Prime Video, Netflix, Disney+, Hulu - PUW2K19YKF470

This is the Hisense CT-95018 remote that came with Hisense TVs. It is a voice remote.

Specifications

• Radio frequency (RF)
• Batteries: 2 AAA (not included)

Good to Know

We may ship the newest model of this remote.

Setup / Pairing

1. Unplug the Fire TV from power for 10 seconds, plug it back in, and let it fully start up to the Home screen before pairing.
2. Press and hold HOME for up to 30 seconds. The TV recognizes the remote and pairs automatically.
3. If the TV says the remote needs an update, let it finish (usually 1 to 3 minutes) without removing power or pressing buttons.
4. If automatic pairing does not work, hold HOME for up to 30 seconds; when the TV detects the remote, press OK to finish pairing. You can also pair from Settings > Controllers & Bluetooth Devices > Add New Remote.
5. If the remote will not pair or stops responding, reset it: press and hold LEFT, BACK and MENU together for 30 seconds, then power-cycle the TV and repeat the pairing steps.

Troubleshooting

• Install fresh batteries, unplug the TV for 10 seconds, and wait for the Home screen to fully load before pairing.
• Hold HOME for the full 30 seconds.
• Reset the remote: press and hold LEFT, BACK and MENU together for 30 seconds, release, then pair again.
• You can also pair from Settings > Controllers & Bluetooth Devices > Add New Remote.
• If the TV says the remote needs an update, let it finish (usually 1 to 3 minutes) without pressing any buttons.

What's in the Box

• 1 Hisense CT-95018 remote
• Batteries not included

Compatible Models

• Hisense CT-95018
• Other part numbers: PUW2K19YKF470

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.