Description
The Anderic FAN53TW is a substitute for the Harbor Breeze FAN-11T / UC7030T remote. It is a Harbor Breeze/Hampton Bay-style 304 MHz ceiling fan remote (4 dip switches).
Specifications
- Shipped remote: Anderic FAN53TW
- Radio frequency (RF)
- Battery: 1 9-Volt (not included)
Good to Know
- Works only with 304 MHz receivers such as UC7067FMRX or FAN28R; a 315 MHz FAN53TB/FAN42R system needs a different remote
- Must match the receiver dip-switch pattern
- Key names and layout may differ from the original. Compare your original's buttons before ordering.
Setup / Pairing
Turn off power at the circuit breaker before opening the canopy or touching or adjusting the receiver. Match or record receiver switches with power off; close covers, then restore power to test. If you are not opening the receiver, you may try remote-only code patterns.
- Make sure the fan has power and works with its wall switch on.
- Remove the remote's battery cover: push firmly below the arrow and slide it off. Set the code switches before installing the battery, because on some models the battery covers the switch panel.
- With a small screwdriver or pen tip, slide the 4 code (dip) switches up or down to a pattern of your choice. The factory setting is all up.
- Set the 4 code switches on the fan's receiver to exactly the same pattern as the remote. The remote and receiver only work together when the patterns match.
- Insert the battery (not included), matching the polarity marks, and replace the battery cover.
- Test: press a fan speed key and the light key. The fan and light respond when the patterns match.
- If you cannot reach the receiver: set the remote's switches to one of the 16 patterns, press a key to test, and if the fan does not respond, move to the next pattern. Repeat until the fan responds.
- If the fan or light turns on and off by itself, another remote is interfering: set a new matching pattern on both the remote and the receiver.
What's in the Box
- 1 Anderic FAN53TW remote
- Battery not included
Compatible Models
- Harbor Breeze FAN-11T / UC7030T
- Supplied with: MinkaAire F569 SUPRA 52 5 Blade, MinkaAire F569BS SUPRA 52 5 Blade, MinkaAire F569BSDW SUPRA 52 5 Blade, MinkaAire F569ORB SUPRA 52 5 Blade, MinkaAire F569WH SUPRA 52 5 Blade
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.
Specifications
Product help/documentation (if applicable): Installation Instructions
Features:
- Replaces your Harbor Breeze FAN-11T / UC7030T with a Harbor Breeze/Hampton Bay-style 304 MHz ceiling fan remote (4 dip switches). Fan speeds, light and dimming for compatible 304 MHz receivers.
- To set it up in place of your Harbor Breeze FAN-11T / UC7030T, remove the remote's battery cover and set the code (dip) switches up or down in a pattern of your choice. The factory setting is all up, then set the receiver's code switches to the same pattern, and replace the battery cover.
- Single LIGHT/DIMMER control; this remote does not independently operate separate upper and down lights.
- Fan speeds, light and dimming for compatible 304 MHz receivers.
- Takes 1 9V battery, not included.
Part/Model Number: FAN11T / FAN-11T / UC7030T
Power Information: 1 9-Volt Required, Not Included
Frequency (if applicable): 303.9 MHz
Supplied with models (if applicable): MinkaAire F569 SUPRA 52 5 Blade, MinkaAire F569BS SUPRA 52 5 Blade, MinkaAire F569BSDW SUPRA 52 5 Blade, MinkaAire F569ORB SUPRA 52 5 Blade, MinkaAire F569WH SUPRA 52 5 Blade
Compatible with models (if applicable): FAN-11T, UC7030T, F569, F569BS, F569BSDW, F569ORB, F569WH, 7787000
Compatible Substitutes and Related Products
- 5 stars: 124 (96%)
- 4 stars: 3 (2%)
- 3 stars: 1 (1%)
- 2 stars: 1 (1%)
- 1 star: 0 (0%)
Super quick delivery. Good instructions included to quickly sync the remote with the fan receiver. Had it operating in less than 10 minutes. Very satisfied.
Works perfectly!!
The Anderic FAN53TW worked perfectly replacing my 22 year old Emerson remote control. They looked similar so I gave it a try.
It was easy to flip my Emerson 4 switches layout to the new remote. Easy peasy! Highly recommend. I wish I had replaced my old remote years ago.
Hi Jud, we're so glad to hear the remote worked perfectly and made your life easier! Thank you for recommending us, and it's never too late to upgrade. Enjoy your new remote!
Ordering the remote has helped me with my problems. It was easy and no adjustment was needed. Thank you
Hi Charlene, we're so glad to hear the remote works perfectly for you! Thanks for sharing your positive experience. If you need anything else, we're here to help.
It worked with my fan and it came quickly.
Works great and easy to program. I had lost my original remote and needed a replacement. This did the trick!
Hi Phil, we're so glad to hear the remote worked perfectly for you! Thanks for sharing your experience.
This is the exact remote I purchased 30 years ago with the fan. I added a battery and didn't even have to change the code ! All functions work as new. Thanks for the hook up !
We’re glad it was a perfect match right out of the box with no setup needed. Thanks so much for sharing your experience, and we appreciate your support!
Soooo easy to set up and very easy to use!
Works great!
It worked! It was easy to set up and it worked with my Craftmade fan/light installed in 2003. Very happy!
Thank you for taking the time to leave a review! We’re thrilled to hear setup was easy and that it’s working perfectly with your Craftmade fan. We appreciate your support and are glad you’re happy with your purchase from Anderic!
fan remote worked right away, our house was built in 1991, and it was such a relief to find the exact remote from when we put the fan in. Great company
So glad the remote worked perfectly and matched your original! We appreciate your trust in Anderic.
this remote solved my problem...thanks
We're so glad to hear that! Thanks for choosing Anderic—happy to have helped solve the issue!
The dip switches are accessible from the battery compartment. I had to set them to match the settings on the original remote and then it worked fine. Wish I had replaced this remote long ago.
Prompt service, and the replacement works perfectly.
This customer rated this item 5 out of 5 stars (left no comment).
Perfect replacement for the old broken remote control - fast delivery and easy to install.
This customer rated this item 5 out of 5 stars (left no comment).
Remote works well straight out of the box..thankyou??????????
Works great!
Works perfect.
Fast service and identical to the original.
Amazing customer support and amazing product!
Worked just like the old one. Very pleased.
The remote arrived quickly and works perfectly. Very pleased with your service. Thank you.
This customer rated this item 5 out of 5 stars (left no comment).
Works great! Very satisfied.
Works as expected.
Received the remotes quickly and they work great. Thanks
surprised how easy it was to order and speed of delivery thanks
fills the bill works well was however expecting the one picture above which is a 9V battery received one that required A23






