Anderic Substitute for Genie GITR-3 3-Button ACSCTG 390 MHz Intellicode Garage Door Opener Remote Control [G3TBX]

The Anderic G3TBX for Genie Intellicode systems is a black and gray remote with three buttons, a red indicator light, and "ANDERIC" branding, ideal for use as a garage door remote.

Anderic G3TBX 3-button garage door remote control in grey with a metal belt clip on the back.

Anderic G3TBX 3-button garage door remote control with black buttons and grey casing on a white background

Anderic 3-button garage door remote control replacement for Genie GITR-3 in grey with Intellicode technology

Roll over image to zoom in Click on image to zoom

Anderic Substitute for Genie GITR-3 3-Button ACSCTG 390 MHz Intellicode Garage Door Opener Remote Control [G3TBX]

Name: Anderic Substitute for Genie GITR-3 3-Button ACSCTG 390 MHz Intellicode Garage Door Opener Remote Control [G3TBX]
Brand: Anderic
SKU: 78445-NEW
Price: 18.70 USD
Availability: InStock

Save 25%

Price:

$18.70 $24.95

Stock:

In stock (283 units) | Same day shipping*

Quantity:

Key Features

Replaces your Genie GITR-3 with a 3-button visor garage door remote for Genie Intellicode openers. Programs to Genie Intellicode garage door openers; each of its three buttons can be programmed to a different opener.
Sets up with the Learn button. Pairs with Genie and Overhead Door Intellicode openers in a few presses; step-by-step instructions are in the description.
The G3TBX is the compatible replacement for the Genie GITR-3 3-button remote, operating at 390 MHz with Intellicode technology for secure garage door control.
Genie lists its G3T-R / G3T-BX 3-button remote as dual frequency (315 and 390 MHz). It is preset for IntelliCode 2, with a setting to switch a button to IntelliCode 1 for older openers.
Takes 1 CR2032 battery, not included.

The Anderic G3TBX is a substitute for the Genie GITR-3 remote. It is a 3-button visor garage door remote for Genie Intellicode openers.

Specifications

Shipped remote: Anderic G3TBX
Radio frequency (RF): 390 MHz
Battery: 1 CR2032 (not included)

Good to Know

It is for Genie Intellicode openers only. For an older IntelliCode 1 opener, switch a button to IntelliCode 1 first (see the setup steps)
Key names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.

Setup / Pairing

Insert the battery, which is not included. Stand at least 5 feet from the opener while programming.
Genie states that an opener whose serial number begins with 10 or higher uses IntelliCode 2, which is the remote's default. For an older IntelliCode 1 opener, switch a button first: choose a button not yet programmed to this opener and hold it for 10 seconds until the red and green LEDs both come on and stay on; press the same button twice to toggle from IntelliCode 2 to IntelliCode 1, then press it once more to confirm. The LED shows red for IntelliCode 1 and green for IntelliCode 2.
Put the opener into programming mode. On a current Genie opener, press and hold the program button until the round LED turns blue, then release it; the round LED goes out and the long LED flashes purple. On an opener or external receiver made between 1995 and 2011, locate the Learn Code button and press and release it once; the red LED flashes.
Within about 30 seconds, slowly press and release the remote button of your choice two times. The opener LEDs flash and go off.
Press and release the same button a third time. The door opens or closes. If the LEDs do not go off, press the button several more times to confirm.
For openers made between 1995 and 1997, use one of the two upper buttons on the remote; for openers made after 1997, any button works.
Keep the garage door clear of people and objects while programming and testing.

What's in the Box

1 Anderic G3TBX remote
Battery not included

Compatible Models

Genie GITR-3

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.

Product help/documentation (if applicable): User Guide

Features:

Replaces your Genie GITR-3 with a 3-button visor garage door remote for Genie Intellicode openers. Programs to Genie Intellicode garage door openers; each of its three buttons can be programmed to a different opener.
Sets up with the Learn button. Pairs with Genie and Overhead Door Intellicode openers in a few presses; step-by-step instructions are in the description.
The G3TBX is the compatible replacement for the Genie GITR-3 3-button remote, operating at 390 MHz with Intellicode technology for secure garage door control.
Genie lists its G3T-R / G3T-BX 3-button remote as dual frequency (315 and 390 MHz). It is preset for IntelliCode 2, with a setting to switch a button to IntelliCode 1 for older openers.
Takes 1 CR2032 battery, not included.

Part/Model Number: 37517S / GITR-3

Power Information: 1 CR2032 Required, Not Included

Compatible with models (if applicable): GITR-3, G3T-BX, G3T-R, G3T-A, G1TBX, G3TBX, GM3T, GT912, GT90, GT90-1, GPT90, MAT90, B8QACT, B8QAGT, GICT390, GIFT390, G3TR

Anderic Substitute for Genie GITR-3 3-Button ACSCTG 390 MHz Intellicode Garage Door Opener Remote Control [G3TBX]

Key Features

Description

Specifications

Good to Know

Setup / Pairing

What's in the Box

Compatible Models

Specifications

Anderic Substitute for Genie GITR-3 3-Button ACSCTG 390 MHz Intellicode Garage Door Opener Remote Control [G3TBX]

Compatible Substitutes and Related Products

Customer Reviews

Recently viewed