Description
The Anderic G3TBX is a substitute for the Genie G3T-R remote. It is a 3-button visor garage door remote for Genie Intellicode openers.
Specifications
- Shipped remote: Anderic G3TBX
- Radio frequency (RF): 390 MHz
- Battery: 1 CR2032 (not included)
Good to Know
- It is for Genie Intellicode openers only. For an older IntelliCode 1 opener, switch a button to IntelliCode 1 first (see the setup steps)
- Key names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.
Setup / Pairing
- Insert the battery, which is not included. Stand at least 5 feet from the opener while programming.
- Genie states that an opener whose serial number begins with 10 or higher uses IntelliCode 2, which is the remote's default. For an older IntelliCode 1 opener, switch a button first: choose a button not yet programmed to this opener and hold it for 10 seconds until the red and green LEDs both come on and stay on; press the same button twice to toggle from IntelliCode 2 to IntelliCode 1, then press it once more to confirm. The LED shows red for IntelliCode 1 and green for IntelliCode 2.
- Put the opener into programming mode. On a current Genie opener, press and hold the program button until the round LED turns blue, then release it; the round LED goes out and the long LED flashes purple. On an opener or external receiver made between 1995 and 2011, locate the Learn Code button and press and release it once; the red LED flashes.
- Within about 30 seconds, slowly press and release the remote button of your choice two times. The opener LEDs flash and go off.
- Press and release the same button a third time. The door opens or closes. If the LEDs do not go off, press the button several more times to confirm.
- For openers made between 1995 and 1997, use one of the two upper buttons on the remote; for openers made after 1997, any button works.
- Keep the garage door clear of people and objects while programming and testing.
What's in the Box
- 1 Anderic G3TBX remote
- Battery not included
Compatible Models
- Genie G3T-R
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.
Specifications
Product help/documentation (if applicable): User Guide
Features:
- Replaces your Genie G3T-R with a 3-button visor garage door remote for Genie Intellicode openers. Programs to Genie Intellicode garage door openers; each of its three buttons can be programmed to a different opener.
- Sets up with the Learn button. Pairs with Genie and Overhead Door Intellicode openers in a few presses; step-by-step instructions are in the description.
- Three buttons for Genie Intellicode openers, supplied with a visor clip.
- Genie lists its G3T-R / G3T-BX 3-button remote as dual frequency (315 and 390 MHz). It is preset for IntelliCode 2, with a setting to switch a button to IntelliCode 1 for older openers.
- Takes 1 CR2032 battery, not included.
Part/Model Number: G3TR / G3T-R
Power Information: 1 CR2032 Required, Not Included
Compatible with models (if applicable): G3T-R, G3T-BX, G3T-A, G1TBX, G3TBX, GITR-3, GM3T, GT912, GT90, GT90-1, GPT90, MAT90, B8QACT, B8QAGT, GICT390, GIFT390, G3TR
Compatible Substitutes and Related Products
- 5 stars: 18 (95%)
- 4 stars: 1 (5%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Works great
Works great
thx for delivery as promised and assistance needed after sale to help me
Great Price and Fast Shipping!!! Work perfect! Super easy to set up and I didn't know I can set both garage units with one control unit... Fantastic!!!!! Don't be foolish and spend so much money on original, this Anderic do the job same as the Genie...
This customer rated this item 5 out of 5 stars (left no comment).
The opener was easy to program to work with my garage door.
My garage door remote opener was installed yesterday and is working fine. Installment was easy.
5 stars!
??
This customer rated this item 5 out of 5 stars (left no comment).
Worked like a charm
Received garage door opener as advertised. Worked great and had no problems.
I love the ease and convenience of getting any remote replaced as needed!
Excellent remote! Works great,and the price was very reasonable, and very prompt shipping! I will purchase from you again!!
works great
Works fine. No complaints. Thank you.
Great product! Replacement Remotes easy company to work with. Fast delivery!
This replacement worked beautiful.
I was completely satisfied with this purchase. The product was exactly as described and it shipped promptly and arrived undamaged. The opener was very easy to program and works great. This wasn't my first order from replacement remotes and it won't be my last!
This customer rated this item 5 out of 5 stars (left no comment).
Is this Genie already programmed?
No - this remote does not arrive pre-programmed to your garage door
opener. You will need to program it to your opener once, using the
instructions included in the package:
1. Pull the protective battery tab from the remote.
2. Put your opener into programming mode: on newer Genie openers,
press and hold the program button on the opener until the round LED
turns blue, then release (the long LED will flash purple). On Genie
openers from 1995 to 2011, press and release the Learn Code button
once (the red LED will begin to flash).
3. Within about 30 seconds, standing about 5 feet away from the
opener, slowly press and release the button on the remote you want to
use two times. The opener LEDs will flash and go off, confirming
programming.
4. Press and release the same button a third time and the door should operate.
Each button on the remote can be programmed to a different opener.