Anderic Substitute for Harbor Breeze FA0198 Ceiling Fan Remote Control | Arbormere 60-in | 4L000016210, A25-FA0198A [RRFA0318]

The Anderic RRFA0318 is a substitute for the Harbor Breeze FA0198 / 4L000016210 / A25-FA0198A remote. It is a ceiling fan remote paired via the learn key. It works with Harbor Breeze ceiling fans such as 43341.

How to confirm the fit

Find the FCC ID on the back of your old remote or inside its battery compartment. It should match A25-FA0198A. If your remote shows a different FCC ID, this remote will not work with your fan's receiver.

Specifications

• Shipped remote: Anderic RRFA0318
• FCC ID: A25-FA0198A
• Radio frequency (RF): 433.92 MHz
• Battery: 1 A23 (not included)

Good to Know

• It works only with the receiver type your old remote controlled; check the FCC ID before ordering.
• Key names and layout may differ from the original. Compare your original's buttons before ordering.

Setup / Pairing

Installing the battery

1. Remove the remote from the wall plate.
2. On the back of the remote, press the tab on the battery cover down towards the cover, then lift it up with your fingernail.
3. Insert 1 A23 (12V) battery, matching the polarity diagram inside the battery compartment. The battery is not included.

Pairing (2 steps)

1. Cycle the power to the fan by turning it off, then back on, using the wall switch or circuit breaker.
2. Tap the learn key in the remote's battery compartment.
3. Test the fan functions to make sure the remote is properly controlling the fan.

Troubleshooting

• The LED indicator should light when any remote button is pressed. If not, replace the battery.

What's in the Box

• 1 Anderic RRFA0318 remote
• Battery not included

Compatible Models

• Harbor Breeze FA0198 / 4L000016210 / A25-FA0198A
• Supplied with: 43341

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.