Anderic RR7078TUDLKIT remote control, substitute for DL-4114T Ceiling Fan, Up & Down Light - DL-4114T

Anderic RR7078TUDLKIT remote control, substitute for DL-4114T Ceiling Fan, Up & Down Light - DL-4114T - with wall mount

Anderic RR7078TUDLKIT remote control, substitute for DL-4114T Ceiling Fan, Up & Down Light - DL-4114T - comparison

Anderic RR7078TUDLKIT remote control, substitute for DL-4114T Ceiling Fan, Up & Down Light - DL-4114T - battery compartment

Anderic RR7078TUDLKIT remote control, substitute for DL-4114T Ceiling Fan, Up & Down Light - DL-4114T - back view

Roll over image to zoom in Click on image to zoom

Anderic Substitute Kit for DL-4114T Ceiling Fan Remote Control | Up & Down Light - DL-4114T [RR7078TUDLKIT]

Name: Anderic Substitute Kit for DL-4114T Ceiling Fan Remote Control | Up & Down Light - DL-4114T [RR7078TUDLKIT]
Brand: Anderic
SKU: 277919-NEW
Price: 44.90 USD
Availability: InStock

Save 44%

Price:

$44.90 $79.95

Stock:

In stock (295 units) | Same day shipping*

Quantity:

Key Features

Replaces your DL-4114T with a 304 MHz ceiling fan remote that pairs by matching dip switches. Fan speed and light; reverse key on TR variants.
To set it up in place of your DL-4114T, remove the remote's battery cover and set the code (dip) switches up or down in a pattern of your choice. The factory setting is all up, then set the receiver's code switches to the same pattern, and replace the battery cover.
This model features a straightforward button layout for managing both fan and light settings from anywhere in the room.
Controls fan speed and light, and TR variants add a reverse key.
Takes 1 9-Volt battery, not included.

The Anderic RR7078TUDLKIT is a substitute kit for the DL-4114T remote. It is a 304 MHz ceiling fan remote and receiver kit that pairs by matching dip switches.

Specifications

Kit: Anderic RR7078TUDLKIT
Radio frequency (RF): 303.916 MHz
Battery: 1 9-Volt (not included)

Good to Know

304 MHz only
Key names and layout may differ from the original. Compare your original's buttons before ordering.

Setup / Pairing

Turn the power to the fan off at the circuit breaker. Install the receiver in the fan canopy following the wiring instructions included with the kit, then restore power.
Remove the remote's battery cover: push firmly below the arrow and slide it off. Set the code switches before installing the battery, because on some models the battery covers the switch panel.
With a small screwdriver or pen tip, slide the 4 code (dip) switches up or down to a pattern of your choice. The factory setting is all up.
Set the 4 code switches on the fan's receiver to exactly the same pattern as the remote. The remote and receiver only work together when the patterns match.
Insert the battery (not included), matching the polarity marks, and replace the battery cover.
Test: press a fan speed key and the light key. The fan and light respond when the patterns match.
If you cannot reach the receiver: set the remote's switches to one of the 16 patterns, press a key to test, and if the fan does not respond, move to the next pattern. Repeat until the fan responds.
If the fan or light turns on and off by itself, another remote is interfering: set a new matching pattern on both the remote and the receiver.

What's in the Box

1 remote and 1 receiver
Battery not included

Compatible Models

DL-4114T

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.

Product help/documentation (if applicable): Installation Instructions

Features:

Replaces your DL-4114T with a 304 MHz ceiling fan remote that pairs by matching dip switches. Fan speed and light; reverse key on TR variants.
To set it up in place of your DL-4114T, remove the remote's battery cover and set the code (dip) switches up or down in a pattern of your choice. The factory setting is all up, then set the receiver's code switches to the same pattern, and replace the battery cover.
This model features a straightforward button layout for managing both fan and light settings from anywhere in the room.
Controls fan speed and light, and TR variants add a reverse key.
Takes 1 9-Volt battery, not included.

Part/Model Number: Y7ZDL4114T / DL4114T

Power Information: 1 9-Volt Required, Not Included

FCC ID (if applicable): Y7ZDL4114T

Frequency (if applicable): 303.916 MHz

Compatible with models (if applicable): DL-4114T, UC7078T, FAN28R, UC7067RC, UC7222TUDL, 51820, 51821, 51822, 51824, 1004589999, 1004590018, 1004589960, 1004589953, IN2TX30, G0878-01

5 stars: 14 (88%)
4 stars: 2 (13%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.