This is a Fanimation TR29 6-speed reversing handheld remote for one Fanimation DC ceiling fan and light.
Specifications
- Radio frequency (RF)
- Battery: 1 A23 (not included)
Good to Know
- It pairs with the fan receiver matched to the TR29. See the Fanimation catalog for the fan models used.
- Turn off power at the main fuse box before any wiring.
Setup / Pairing
Pairing (SET button)
- With the fan power off, install the battery (not included) and set the code switches to the code you want.
- Turn the fan power on. Within 60 seconds, press and hold the SET button on the back of the remote with a ballpoint pen for 5 seconds to sync with the fan motor.
- Press the highest speed to set the rotation speed; it can take up to 120 seconds to reach speed.
- Press reverse, then the highest speed again; it can take up to 120 seconds to reach speed.
If you change the blades, turn the power off, change the blades, turn the power on and repeat the setting process.
What's in the Box
- 1 Fanimation TR29 remote
- Battery not included
Compatible Models
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.