Anderic Substitute Kit for Fanimation Fans RH786R Up/down light Ceiling Fan Receiver [RH786R/RR787T-KIT]

The Anderic RH786R/RR787T-KIT is a substitute kit for the Fanimation RH786R receiver: an RH786R receiver and an RR787T remote.

Specifications

• Kit: Anderic RH786R/RR787T-KIT
• Radio frequency (RF)
• Battery: 1 23A (not included)

Good to Know

• It works only with fans that came with the RH786R receiver. It does not work with fans that use a different receiver style.
• The receiver works only with the RH787T or RR787T remote.
• Key names and layout differ from the original. Compare your original's buttons before ordering.

Setup / Pairing

1. Turn off the power at the circuit breaker or fuse box. Unplug the old receiver and plug in the RH786R, following your fan's instructions.
2. Remove the remote's battery cover and set its dip switches to any setting you choose; the fan learns the setting. Install the 23A battery (not included).
3. Restore power to the fan. Do not press any other button before SET.
4. Within 60 seconds of restoring power, press and hold SET for 1 to 5 seconds.
5. The light blinks twice: the fan now responds to the remote.
6. If you pressed another button first or it does not pair, turn the power off and on again and repeat from step 3.

What's in the Box

• 1 remote and 1 receiver
• Battery not included

Compatible Models

• Listed for the Fanimation RH786R. Works with fans that used the RH786R receiver

Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.