Anderic Substitute Kit for Casablanca RH786NRW STEALTH Ceiling Fan Receiver [UC7225T-UC786N12-KIT]

The Anderic UC7225T-UC786N12-KIT is a substitute for the Casablanca RH786NRW. It is a DC ceiling fan receiver and remote kit (UC786N-12 / RH786NRW receiver and RR7225T remote). It is not an exact copy of your old remote.

What it can do

• Up to 9 fan speeds on DC motor fans
• Light control
• Plug-in receiver installed above the fan motor
• Uses 2 AAA batteries in the remote, which are not included

How it differs

• It comes with its own receiver and remote; the old receiver and remote are not used.
• Key names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.

Setup / Pairing

1. Turn the power to the fan off at the circuit breaker. Install the receiver in the fan housing following your fan's instructions, then reinstall the housing.
2. Remove the remote's battery cover by pressing firmly on the arrow and sliding it off. Insert the battery (not included), matching the polarity marks.
3. To pair (learning process): with the fan's power OFF, slide the dip switch in the battery compartment to the "1" position.
4. Turn the fan's power ON. If you have several fans, turn on power only to the fan you are pairing, so the other fans do not learn this remote.
5. Within 60 seconds of turning the power on, press and release the PAIRING button in the remote's battery compartment.
6. When the fan detects the remote, the down light (if your fan has one) blinks and the blades start to spin. The fan now accepts commands from this remote. A fan can learn up to five remotes.
7. To reset the fan to its factory setting and drop other remotes: turn the power off, slide the dip switch to "0", turn the power on, and within 60 seconds press and release PAIRING.
8. If it does not pair, turn the power off and repeat the steps, pressing PAIRING within 60 seconds of restoring power.

Compatibility

Compatible with: Casablanca RH786NRW.