Description
The Anderic UC9051T wired wall controller and UC7067FMRX receiver kit converts a pull-string 3-speed or 4-speed AC ceiling fan to wall-controlled 3-speed operation.
Specifications
- Radio frequency (RF)
Good to Know
- Only for AC ceiling fans with lights.
- For fans without a remote kit, or with the same style of canopy receiver.
- The wall controller is hard-wired.
- Follow the installation instructions included with the kit; for wiring questions, use a licensed electrician.
Setup / Pairing
Step 1: Install the UC7067FMRX receiver
- WARNING: High voltage. Turn off power to the fan by removing the fuse or switching off the circuit breaker.
- Remove the fan canopy from the mounting bracket.
- Disconnect the existing wiring between the fan and the supply at the junction box. If you are replacing a receiver, disconnect all of its wires.
- Lay the black antenna wire on top of the receiver and put the receiver in the mounting bracket.
- Connect with the supplied wire nuts: green fan wire to bare supply wire; black receiver wire (AC IN L) to black supply wire; white receiver wire (AC IN N) to white supply wire; white receiver wire (TO MOTOR N) to white fan wire; black receiver wire (TO MOTOR L) to black fan wire; blue receiver wire (FOR LIGHT) to blue light wire.
- Push all connected wires up into the junction box and reinstall the canopy.
- Before closing up, note the dip switch pattern on the UC7067FMRX receiver.
Step 2: Install and match the UC9051T wired wall control
- Make sure the fan and wall switch are powered OFF at the fuse box.
- Wire the wall control (AC 120V) as shown in the guide: black wire with yellow tag to AC supply (black wire from receiver); black wire with blue tag to AC supply (black wire to receiver input); green to ground.
- Before attaching the face plate, find the dip switches on the left side of the wall control and set them to EXACTLY match the receiver's dip switch pattern.
- Attach the face plate. The OFF/ON switch powers the wall control; it will not operate when switched off.
The remote only works when its 4 dip switches are set to exactly the same up/down pattern as the receiver's switches.
What's in the Box
- 1 remote and 1 receiver
Works with AC ceiling fans with lights, 3-speed or 4-speed pull-string.
Specifications
Product help/documentation (if applicable): User Guide
Features:
- Works with Anderic UC9051T wired wall controller and UC7067FMRX receiver kit for AC fans with lights.
- Install the receiver, then set the wall control's dip switches to match it; step-by-step instructions are in the description.
- Light on/off and dimming, fan high, medium, low and off.
- Only for AC fans with lights; reverse only if your fan supports it.
- Converts 3-speed or 4-speed pull-string fans to 3-speed wall control.
Part/Model Number: UC9051T-WIRED-UC7067FMRX-KIT
Power Information: 1 A23 Required, Not Included
FCC ID (if applicable): CHQ8BT9051T
Frequency (if applicable): 303.875 MHz
Compatible Substitutes and Related Products
- 5 stars: 25 (83%)
- 4 stars: 4 (13%)
- 3 stars: 1 (3%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Perfect hard to find switch. Got here right on schedule .
Easy to install, more reliable than a remote.
Item arrived very fast, it was as described, and worked right away as it should. Happy with my purchase
Hi Andy, we're thrilled to hear you're happy with your purchase! Thanks for choosing Anderic, and feel free to reach out if you need any assistance in the future.
The control worked flawlessly. I had a lot of great help from the customer service rep which I greatly appreciate.
Thank you for leaving a review! We’re so glad to hear everything worked out and that one of our customer service representatives was able to provide great support. We’re proud of our team and love knowing their efforts made a positive difference. Thanks again for choosing Anderic!
No problem with the switch make sure that you know how to set your pins for it to work properly, smooth operation just wish that the round button to turn the lights on which is made to glow in the dark, actually had its own light source to see it in the dark.
Perfect replacement for a switch no longer made by the fan manufacturer.
Switch Light and Fan Control works as expected. Not very difficult to install. Happy with purchase.
Happy to know everything’s working just the way you hoped! Thanks for sharing your experience and for trusting Anderic!!
About 10$ more expensive than Amazon. Didn't check before I purchased. The fan wall switch worked fine and was easy to install.
Happy about the service but to no fault of yours the receiver won’t respond So thank you and we’re going to save it until we get another fan and get a reciever then
This fan wall controller was functionally a perfect substitute for the Craftsman UC7077T that is no longer made. I had tried two other products that didn’t work, one that I bought from a website that claimed to be a a UC7077T and wasn’t, and the Craftsman advertised replacement for UC7077T, neither worked for my fan/light, which uses a dip switch. Also the product was shipped promptly by Anderic.
Power outage shorted out monte Carlo fan control receiver. 3 speed fan with reverse and up and down lights. Tried other receivers and none worked but this one worked correctly and with three different controllers I had on hand. Two wireless wall controls and one remote.
Fast shipping made the purchase even better.
So far so good for a week! Replaced a Regent fan control that lasted more than 15 years. Hope it lasts a few years! Thanks for having a replacement!
This customer rated this item 5 out of 5 stars (left no comment).
Perfect replacement and easy to install
exactly what I ordered at a much better price than "you know who". Thanks
p.s. I'm not sure how you solve this, but I was very reluctant to order from you as I've been scammed online before
This customer rated this item 5 out of 5 stars (left no comment).
it worked great
Perfect fast shipping will us again for sure
easy to install, thought they had function for up lights, but they did not. we just turn them off and the uplights go off.
This customer rated this item 5 out of 5 stars (left no comment).
Perfect replacement. Shipping was faster than expected! Price was extremely reasonable. Will look forward to doing business again with Dan’s Electronics.
This customer rated this item 5 out of 5 stars (left no comment).
All is good.
Price very competitively and works as advertised.
Had a issue getting the ones I wanted, the wired and non wired use the same part number, was a bit of a mix up when ordered,
Worked great
Perfect replacement! Restored the full functionality of my fan!
Worked right out of the box. Just what we needed. Wired, so no battery needed.
How does the dimmer function work?
HI there! You hold the green light button down for dimming.