Description
This Anderic kit adds a wired wall control, a handheld remote, and a receiver to most 3-speed AC ceiling fans. It is sold as the UC9051T-Wired, UC7067FMRX, and RR7079T kit.
Specifications
- Wall control: Anderic UC9051T Wired (CHQ9051T)
- Handheld remote: Anderic RR7079T
- Receiver: Anderic UC7067FMRX
- Wireless: Radio Frequency (handheld); wired wall control pairs by dip switches
- Batteries: 1 A23 / 23A for the handheld remote (not included)
- Fan control: 3 speeds plus off; light on/off and dimming
Good to Know
- Turn off power at the breaker or fuse box before installing the wall control or the receiver. Household electrical power can cause serious injury or death. A qualified electrician is recommended.
- The wall control’s OFF/ON switch must be on for the wall control to operate.
- Reverse works only if the fan supports reverse.
- The look may differ from the photos. Compare the part numbers before ordering.
Setup / Pairing
Install the receiver (power must be off):
- Disconnect power to the fan at the fuse or circuit breaker.
- Remove the canopy and disconnect the existing wiring. If you are replacing a receiver, disconnect all of its wires.
- Place the receiver in the mounting bracket with the antenna laid on top of the receiver.
- Connect the wires with the included wire nuts: green fan wire to the bare supply ground; black receiver AC IN L to the black supply wire; white receiver AC IN N to the white supply wire; white receiver TO MOTOR N to the white fan wire; black receiver TO MOTOR L to the black fan wire; blue receiver FOR LIGHT to the blue light wire.
- Push the wires into the junction box, reinstall the canopy, and keep power off until the wall control is wired.
Install and pair the UC9051T wired wall control (power must be off):
- With power still off, connect the wall control as labeled: black wire with a yellow tag to the AC supply (back/return wire from the receiver); black wire with a blue tag to the AC supply (black wire to the receiver input); green to ground.
- Before you attach the face plate, set the dip switches on the side of the wall control to match the dip switches on the receiver.
- Install the face plate, insert 1 A23 battery in the handheld remote, set the handheld remote’s dip switches to the same pattern, then restore power and test both controls.
What's in the Box
- 1 Anderic UC9051T wired wall switch remote
- 1 white wall plate
- 1 Anderic UC7067FMRX receiver
- 1 Anderic RR7079T handheld remote
- 1 wall mount bracket
- Wire nuts and screws
- Battery not included
Compatible Models
- Anderic UC9051T-Wired / CHQ9051T, UC7067FMRX, and RR7079T kit
- Most 3-speed AC ceiling fans that can use a UC7067FMRX or FAN28R-style receiver.
Before ordering, compare the photos and the model or part number on your current remote or device. If you are not sure, contact us with your model or a photo of the original.
Specifications
Product help/documentation (if applicable): User Guide
Features:
- This Anderic kit includes a UC9051T wired wall control, an RR7079T handheld remote, and a UC7067FMRX receiver for most 3-speed AC ceiling fans.
- The handheld remote takes 1 A23 battery, not included. Fan control is 3 speeds plus off, with light on/off and dimming.
- Turn power off before wiring. Set the wall control and handheld remote dip switches to match the receiver.
- The wall control’s OFF/ON switch must be on for the wall control to operate. Reverse works only if the fan supports it.
- Includes wired wall control, wall plate, receiver, handheld remote, wall mount, wire nuts, and screws. Battery not included.
Part/Model Number: WIREDWALLKIT / WIREDWALLKIT
Power Information: 1 A23 Required, Not Included
FCC ID (if applicable): CHQ8BT9051T
Frequency (if applicable): 304.0 MHz
Compatible with models (if applicable): WIREDWALLKIT
Compatible Substitutes and Related Products
- 5 stars: 25 (83%)
- 4 stars: 4 (13%)
- 3 stars: 1 (3%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Perfect hard to find switch. Got here right on schedule .
Easy to install, more reliable than a remote.
Item arrived very fast, it was as described, and worked right away as it should. Happy with my purchase
Hi Andy, we're thrilled to hear you're happy with your purchase! Thanks for choosing Anderic, and feel free to reach out if you need any assistance in the future.
The control worked flawlessly. I had a lot of great help from the customer service rep which I greatly appreciate.
Thank you for leaving a review! We’re so glad to hear everything worked out and that one of our customer service representatives was able to provide great support. We’re proud of our team and love knowing their efforts made a positive difference. Thanks again for choosing Anderic!
No problem with the switch make sure that you know how to set your pins for it to work properly, smooth operation just wish that the round button to turn the lights on which is made to glow in the dark, actually had its own light source to see it in the dark.
Perfect replacement for a switch no longer made by the fan manufacturer.
Switch Light and Fan Control works as expected. Not very difficult to install. Happy with purchase.
Happy to know everything’s working just the way you hoped! Thanks for sharing your experience and for trusting Anderic!!
About 10$ more expensive than Amazon. Didn't check before I purchased. The fan wall switch worked fine and was easy to install.
Happy about the service but to no fault of yours the receiver won’t respond So thank you and we’re going to save it until we get another fan and get a reciever then
This fan wall controller was functionally a perfect substitute for the Craftsman UC7077T that is no longer made. I had tried two other products that didn’t work, one that I bought from a website that claimed to be a a UC7077T and wasn’t, and the Craftsman advertised replacement for UC7077T, neither worked for my fan/light, which uses a dip switch. Also the product was shipped promptly by Anderic.
Power outage shorted out monte Carlo fan control receiver. 3 speed fan with reverse and up and down lights. Tried other receivers and none worked but this one worked correctly and with three different controllers I had on hand. Two wireless wall controls and one remote.
Fast shipping made the purchase even better.
So far so good for a week! Replaced a Regent fan control that lasted more than 15 years. Hope it lasts a few years! Thanks for having a replacement!
This customer rated this item 5 out of 5 stars (left no comment).
Perfect replacement and easy to install
exactly what I ordered at a much better price than "you know who". Thanks
p.s. I'm not sure how you solve this, but I was very reluctant to order from you as I've been scammed online before
This customer rated this item 5 out of 5 stars (left no comment).
it worked great
Perfect fast shipping will us again for sure
easy to install, thought they had function for up lights, but they did not. we just turn them off and the uplights go off.
This customer rated this item 5 out of 5 stars (left no comment).
Perfect replacement. Shipping was faster than expected! Price was extremely reasonable. Will look forward to doing business again with Dan’s Electronics.
This customer rated this item 5 out of 5 stars (left no comment).
All is good.
Price very competitively and works as advertised.
Had a issue getting the ones I wanted, the wired and non wired use the same part number, was a bit of a mix up when ordered,
Worked great
Perfect replacement! Restored the full functionality of my fan!
Worked right out of the box. Just what we needed. Wired, so no battery needed.