Description
The Anderic RR7080T / UC7058GM kit is a replacement remote and receiver for the Hampton Bay Miramar 60 in. ceiling fan.
Specifications
- Kit: Anderic RR7080T
- Radio frequency (RF)
- Battery: 1 9-Volt (not included)
Good to Know
- Use the receiver with the RR7080T remote supplied in this kit.
Setup / Pairing
- Turn off power to the fan at the circuit breaker.
- Remove the screws from the receiver cover on top of the motor housing, and remove any zip ties holding the wires.
- Loosen the clip screw holding the power and antenna wires if needed, cut the crimps on the receiver's blue and white wires, and disconnect the 9-pin connector.
- Remove the two screws holding the old receiver.
- Install the new UC7058GM receiver in reverse order, using wire nuts to join its blue and white wires to the fan's blue and white wires. Note the receiver's 4 dip-switch pattern.
- Remove the remote's battery cover and set its 4 dip switches to exactly the same pattern before inserting the battery (factory setting is all up).
- Insert the battery (not included), matching the polarity marks, and replace the cover.
- Restore power and test the fan speeds and light.
- If the fan or light turns on and off by itself, another remote is interfering: set a new matching pattern on both the remote and the receiver.
Safety: turn off power at the circuit breaker before opening the fan canopy or touching the receiver.
What's in the Box
- 1 remote and 1 receiver
- Battery not included
Compatible Models
- Hampton Bay Miramar 60 in. ceiling fans (UC7058GM receiver)
- Also works with: Hampton Bay AC374-WB Miramar 60 in. Ceiling Fan 458 242, Hampton Bay AC374-BN Miramar 60 in. Ceiling Fan 339-793, Hampton Bay AC374-WB Miramar 60 in. Ceiling Fan 133-715
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.
Caractéristiques
Product help/documentation (if applicable): Installation Instructions
Features:
- Works with models such as Hampton Bay AC374-WB and AC374-BN Miramar 60 in. ceiling fans.
- Turn off power to the fan at the circuit breaker, then remove the screws from the receiver cover on top of the motor housing, and remove any zip ties holding the wires. Loosen the clip screw holding the power and antenna wires if needed, cut the crimps on the receiver's blue and white wires, and disconnect the 9-pin connector; step-by-step instructions are in the description.
- UC7058GM receiver with a 9-pin connector and blue/white light wires. RR7080T remote, the matching remote for this receiver.
- Remote and receiver pair by matching 4 dip switches (16 codes). REVERSE key on the RR7080T toggles fan direction and the UC7058GM has reversing built in.
- Takes 1 9-Volt battery, not included.
Part/Model Number: AND-RR7080T-UC7058GM-KIT / AND-RR7080T-UC7058GM-KIT
Power Information: 1 9-Volt Required, Not Included
FCC ID (if applicable): CHQ7080T
Frequency (if applicable): 303.921 MHz
Compatible with models (if applicable): UC7058GM, AC374-WB, AC374-BN, 339-793, 133-715
Vous aimerez peut-être aussi
- 5 stars: 366 (94%)
- 4 stars: 15 (4%)
- 3 stars: 3 (1%)
- 2 stars: 0 (0%)
- 1 star: 5 (1%)
Came quickly and the remote for the ceiling fan worked perfectly... have ordered from this company before
Hi Regina, thank you for your lovely review! We're glad the remote worked perfectly and appreciate your business.
Aydan was very helpful. He had the perfect remote that was a replacement for my 18 year old Regency fan! It work after adjusting the code that was in the old remote and plugging in a battery.
Hi Arlene, we're so glad Aydan could help you find the perfect replacement remote! Thanks for sharing your experience!!
I was not sure I would find a remote for my 2 decade cold ceiling fan. The shipping was fast and the remote was easy to program. It is nice to utilize all the functionality of the fan effortlessly once again. I highly recommend!
Works well. Need to get in right position
Received parts quickly and parts worked great, very satisfied.
Hi there! We're so happy to hear that you're satisfied with your purchase and that everything worked great. Thank you for sharing your experience!
Great replacement remote for my Hampton Bay ceiling fan. Works (and looks) as well as the original remote did.
This worked perfectly. Copied the code from the old remote and it worked immediately.
The new remote didn't fix my problem but your service was excellent. Received what I purchased and it was delivered on time! .
Great selection of parts available for differing brands of ceiling fans, as well as ceiling fan remotes. They had exactly what I needed, and I appreciate their knowledge of their products when I spoke with them on the phone. Fast shipping too.
Worked like a charm
I ordered a wireless wall unit, and received a wired instead. Tried to connect with the sales team and sent 2 emails, no response. I would expect different from a customer focused organization.
Worked perfect
I'm converting a hard wired wall remote to a wireless wall remote. When I used the QR code I ecpected to see a instalation manual. I was wrong. I will be sending it back. I asked your chat bot and got nothing
Perfect
Very well satisfied with the remote.. it works perfectly
Thank you for taking the time to leave a review! We’re glad to hear that you’re very satisfied with the remote and that it’s working perfectly for you. We truly appreciate your support and hope you continue to enjoy it! If you ever need assistance in the future, we’re always happy to help.
It was easy to order and set up. Thank you.
Received the remote in a timely manor. However when I tried to use it it didn't work. Then I saw the dip switches and matched them to the configuration of the old remote. Works well now
Anderic CHQ7080T / UC7080T with Up/Down/Rev for Hampton Bay Ceiling Fan - Remote Control - RR7080T
Easy to set up. Works great!
Anderic CHQ7080T / UC7080T with Up/Down/Rev for Hampton Bay Ceiling Fan - Remote Control - RR7080T
The easiest replacement of any thing I've ever replaced. Literally put a battery in it and it worked! Beyond impressed; a little mustard seed of faith in consumerism was restored with this transaction. 10 stars!🌟 thank you!!!!
I would like to say your customer service is excellent!!!!!
I have an older fan and the manufacturer has gone out of business.
I was very fortunate to speak with DALTON at your company and after asking me some basic questions, he was able to find the remote control part I was looking for. That made my day. I just installed the remote and it works Perfectly. Thank you very much, Dalton
Bryan
Could not find installation instructions. Set switches as on original remote. All but dimming worked. Lights go on or off but dimming doesn’t work. All three fan spreeds work as does off switch.
works great like the control that came with the fan except it does not change the light from dim to bright. Happy with it.
great replacement product, but more importantly. amazing customer support...
Remote works great and ordering was easy.
Works great
Works perfectly. Added the 9v battery and worked immediately, no additional steps or programming.
Works great. Opened package, removed battery block, and it linked and worked immediately. Very satisfied.





