Description
The Anderic FAN2R-RR7078TR-KIT is a ceiling fan remote and receiver kit for 3-speed fans: an RR7078TR remote and a reversing receiver that pair by matching 4 dip switches on 304 MHz.
Specifications
- Kit: Anderic FAN2R-RR7078TR-KIT
- Radio frequency (RF): 304 MHz
- Battery: 1 9-volt (not included)
Good to Know
- If your fan has an AMP-type plug instead of the 9-pin square (Molex) plug, an adapter cable is needed.
Setup / Pairing
- Turn off power to the fan at the circuit breaker. A qualified electrician is recommended.
- Open the fan housing (see your fan's instructions) and unplug the old receiver.
- Fit the new receiver; if the old receiver used tabs or clips, they can be broken off so the new one fits.
- Plug the fan's square 9-pin plug into the receiver, then connect the blue and white light-kit wires, matching colors.
- Note the receiver's 4 dip-switch pattern (or set the pattern you want) and reinstall the housing.
- Remove the remote's battery cover and set its 4 dip switches to exactly match the receiver before inserting the battery (factory setting is all up; a different pattern is recommended).
- Insert the 9-volt battery (not included), matching the polarity marks, and replace the cover.
- Restore power and test the fan speeds, light and Reverse key.
- If the fan or light turns on and off by itself, another remote is interfering: set a new matching pattern on both the remote and the receiver.
Safety: turn off power at the circuit breaker before opening the fan canopy or touching the receiver.
What's in the Box
- 1 remote and 1 receiver
- Battery not included
Compatible Models
- Works with many Hunter ceiling fans, including models such as 8511202, 85069-060 and 23530420.
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.
Caractéristiques
Product help/documentation (if applicable): Installation Guide
Features:
- Works with 3-speed ceiling fans that use a FAN2R or UC7051R receiver and a Hampton Bay UC7078T / CHQ7078T style remote.
- Turn off power to the fan at the wall switch or circuit breaker, and a qualified electrician is recommended, then open the fan housing (see your fan's instructions) and unplug the old receiver. Fit the new receiver, and if the old receiver used tabs or clips, they can be broken off so the new one fits; step-by-step instructions are in the description.
- Receiver with a plug-in 9-pin square connector and blue/white light-kit wires. The Anderic FAN2R-RR7078TR-KIT is the ideal replacement kit for restoring control to your Hampton Bay or Hunter ceiling fan.
- Remote keys, light on/off (press and hold to dim), fan speeds LO, MED and HI, fan OFF and Reverse. Designed to replace the Hampton Bay FAN2R receiver and UC7078T remote with reverse functionality, this all-in-one kit provides full control of the fan and lighting.
- Takes 1 9-volt battery, not included.
Part/Model Number: FAN2R-RR7078TR-KIT / FAN2R / RR7078TR
Power Information: 1 9-Volt Required, Not Included
Frequency (if applicable): 304.0 MHz
Compatible with models (if applicable): FAN2R, UC7051R, UC7078T, CHQ7078T, 85112-03, 7091-02, 8511202, 7063-01A, CP9430R, IN2TX09, G2H2XJR520R, UC7848T, UC7042T, IN2TX01, 8509501, 8509502, 8511204, 85069, IN2TX27, KUJCE9811, 85069-060, 23530420, 639116700, CXL52, RR7083TR, RR7078TR
Vous aimerez peut-être aussi
- 5 stars: 153 (86%)
- 4 stars: 20 (11%)
- 3 stars: 2 (1%)
- 2 stars: 1 (1%)
- 1 star: 1 (1%)
We thought we needed to replace the fan in our family room. The remote control was missing when we moved in less than a year ago.Hunter had discontinued the product. When we originally removed the control module I didn't notice the part number on it. And then last week I had time to look into the problem again and noticed the part number on the module and searched it on line. When the Anderic substitute came up we decided to give it a try. GLAD we did. I installed it today a direct replacement took less than hour start to finish.Works great and now; happy wife/ happy life.
Nice replacement - better than having to replace the whole fan
It was exactly what we needed. It works great! Shipping was pretty quick. We have no complaints. I would do business here again
Hi Sandra, thanks so much for the great review! We’re glad the remote kit was exactly what you needed and that it’s working great. We appreciate your kind words about the shipping and would be happy to serve you again!
It works great & it’s much cheaper then replacing the fan. Note; it’s not plug & play, meaning you may have to replace the light wires connectors as I did.
Nice upgrade from the original Hunter controller.
Original design did not have the light dimming option
As promised and arrived quickly! Thanks!
Hi Mark, we're so glad to hear your remote arrived quickly and met your expectations! Thanks for your support.
working good so far
Hi Joe, we're glad to hear the receiver is working well for you! Thanks for sharing your feedback.
Quick delivery and great phone support !!!
The product worked perfect perfectly, the company shipped it out and got it to me very quickly, they included instructions with pictures, I was skeptical, but it really worked out very well
Worked great on my old hunter fan.
Fantastic. Easy install. Great instructions and web support. Had the replacement installed and working in about 30 minutes.
Thank you for the great review! It's great to know you had your replacement up and running so quickly. We truly appreciate your support and are happy the remote is working well for you!
just received the unit. installed it and we now have both light and fan...
thanks for your video and product!
It was the perfect replacement for my 2003 beautiful Hunter fan!!! Easy no frill install.
Thank you for the great review! We’re so glad it was the perfect replacement for your 2003 Hunter fan and that the installation was quick and easy. Enjoy your fan, and thanks for choosing Anderic!
Original hunter fan receiver quit. The Fan2r kit was delivered on time was a breeze to install: took about 10 minutes and fit perfectly. Turned fan on low and it sounded a motor with a broken rod. Took fan apart again and removed 2 blades to discover the hunter receiver antenna retainer (a bakelite or plastic ring with the wire embedded) that was mounted between the blade mounts and the cup above the retaining cap for the receiver housing had failed leaving several large and small pieces of curved plastic or bakelite in the cup which were contacting the fan blade mounts causing the grinding racket. After removing the debris and reassembly, the fan works perfectly! Thanks Anderic!!
I purchased two of these receivers and a single remote for my family room fans. The room is large and we put in two very nice Hunters. After a few years one of the fans would only go into forward, no reverse.
These came in quick, fit perfectly and are working great.
Thank you for sharing your experience! We’re glad to hear the receivers arrived quickly, fit perfectly, and solved the issue with your fans. It’s great to know everything is working smoothly again. If you ever need assistance or have questions in the future, we’re always here to help!
Device fit and worked well. Two issues. 1) Connectors for white and black wire were not correct. Had to strip off insulation and connect with wire nuts.
2) Dimming function for light does not work. Fixture has LED bulbs.
Anderic FAN2R for Hampton Bay Ceiling Fan Receiver - FAN-2R
Got here on time, installation was quick and easy and plug and play was just as expected. Excellent product, customer service and performance was all high grade !
good
Knowledgeable staff. Great service.
It was a little smaller than the original but the very soft aluminum brackets allow for easy reshaping to create a snug fit.
I had trouble taking the old “bullet” connectors apart as they seem to lock themselves in together.
I followed your recommendations on what to buy, bought it, installed it, and everything worked fine first time. Very reasonably priced, and lived up to my highest expectations. Outstanding. Will definitely recommend to others.
Easy to install
I wish it had had instructions
on how to disconnect the connectors.
Fantastic Product, at an affordable price!!! Thank You, Dan's Electronics & you're company Anderic. If it wasn't for you, many folks' older, no longer supported products would be junk. Such as my two quality Hunter fans made back in the day. When my Hunter Grand Isle quit working, I discovered it had voltage to the receiver but not coming out. So I looked up Hunter part no. 85112-02 only to find that all old inventory has been exhausted. I also have a Hunter Rosemount with the same internals. So luckily, I discovered Dan's with their Anderic line, which makes new replacements. The receiver & corresponding remote work great. It was plug & play, except the wires going to the lights. Unless you have the same connectors on your light wires, most will have to cut the connectors off & just wire nut the ends together. Other than that, it works even better than the original, due to it remembering the settings when powered off at the switch, not defaulting to light on, fan off, or fan clockwise when signaled, every time the wall switch is turned off/on. Now, it remembers my last settings & that's what comes on when turning the switch back on. No more lights on when the power goes out & comes back on too! Also doesn't have interference with LED bulbs, which I had to run at least one filament bulb w/LEDs before to stop the flicker. Nice to have those bugs worked out. A couple years back I purchased a few of the Hunter 85095-01 remotes for my fans before that inventory ran out. Looks like I'll get the chance to sell a couple on ebay now. Don't need them with this new receiver. I feel better knowing that if anything happens to my Rosemount next, replacements are there. If any of the new parts break, receiver or remote, Anderic is still producing them affordably. So no worries going forward. Very happy with Dan's Electronics & Anderic line.
This customer rated this item 5 out of 5 stars (left no comment).
Great product. Perfect fit.
Working great
Installed and is working perfectly! I have dimmer/light and L-M-H-Rev ceiling fan!