Description
The Anderic FAN10R/FAN9TR kit pairs the Anderic FAN10R receiver with the FAN9TR thermostatic remote for Hampton Bay ceiling fans.
Specifications
- Kit: Anderic FAN10R/FAN9TR
- Radio frequency (RF)
- Batteries: 4 AAA (not included)
Good to Know
- The receiver mounts on top of the motor housing and plugs in with a 9-pin connector.
- Turn off power at the circuit breaker or fuse box before opening the fan canopy or housing. A qualified electrician is recommended.
Setup / Pairing
Installing the FAN10R receiver
- Turn off the power to the fan at the circuit breaker box.
- Remove the screws from the receiver cover on top of the motor housing.
- Remove any zip ties holding down the wires, and any screws holding down the receiver, if needed.
- Disconnect the 9-pin connector plug.
- Install the new receiver by doing the steps above in reverse order.
- Note the receiver's dip switch pattern for pairing in the next step.
Pairing the remote (16 codes, 4 dip switches)
- On the remote, remove the battery cover and set the dip switches to any pattern.
- On the receiver, set the dip switches to EXACTLY the same pattern as the remote.
- Replace the cover, restore power and test.
What's in the Box
- 1 remote and 1 receiver
- Wall mount bracket
- Batteries not included
Compatible Models
- Hampton Bay ceiling fans that use a FAN-10R receiver
Before ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.
Caractéristiques
Product help/documentation (if applicable): User Guide
Features:
- Works with Hampton Bay ceiling fans that use a FAN-10R receiver. The Anderic FAN10R/FAN9TR kit pairs the Anderic FAN10R receiver with the FAN9TR thermostatic remote for Hampton Bay ceiling fans.
- Plug the FAN10R into the 9-pin connector and set its 4 dip switches to match the remote; step-by-step instructions are in the description.
- FAN AUTO switches between manual and automatic (temperature) control, and FAN SWITCH steps through low, medium, high and off. To switch between Celsius and Fahrenheit, hold TEMP UP and DOWN together for 3 seconds.
- LIGHT on and off, a 3-minute light delay, a timer and FOR/REV for blade direction.
- Takes 4 AAA batteries, not included.
Part/Model Number: 10R-FAN9T-KIT / FAN10R / FAN9T
Power Information: 4 AAA Required, Not Included
FCC ID (if applicable): L3HFAN-9T
Frequency (if applicable): 303.9 MHz
Compatible with models (if applicable): FAN-10R
Vous aimerez peut-être aussi
- 5 stars: 93 (92%)
- 4 stars: 7 (7%)
- 3 stars: 0 (0%)
- 2 stars: 1 (1%)
- 1 star: 0 (0%)
Working well
Working well
Plug &Play replacement that works like a charm. The antenna is slightly different as it is a loose wire with an insulated end. The original antenna was screwed with a ring connector to the metal plate where the receiver is sitting which probably provided more receiving surface). However, no transmission issue with my original remote. All commands are received perfectly. We’ve had our Hampton Bay Windward II fan for 22 years and now we can use it for many more years to come. Thank you!
Outstanding! Easy to replace, worked great
This is replaced Hampton Bay UC7058R/7058RLC-02 receiver. It works well with Hampton Bay transmitter (FCC ID: CHQ8B7096T).
Buen precio excelente envio y muy excelente me gustaria el diagrams o me dijeran el problema de esta unidad cuando la luz no prende
Works just fine.
Great product and servicd.
excellent works great Thank You
Perfect fit. Works great
The replacement receiver worked perfectly! I was afraid it might be the sending unit (remote) but thank goodness no! Just what I needed. Delivery ok. I'm a happy camper!
This customer rated this item 5 out of 5 stars (left no comment).
Perfect replacement, Thankyou...
Exactly what was needed to fix the fan. Shipped and arrived fast and was a very good price.
WORKS!
works great
Superb service . Will recommend definitely. On time delivery
better antenna that the original but still 100% compatible. worked perfectly
worked as expected. arrived on time! solved my fan issues....
Erreur de commande ma part et remboursement demander...merci
This customer rated this item 5 out of 5 stars (left no comment).
Expelen muy rápido, vale la pena comprarlo, tiene mi confianza. Yo le daría un 100%
Pude arreglar el abanico y la velocidad esta como nuevo
This customer rated this item 5 out of 5 stars (left no comment).
This customer rated this item 5 out of 5 stars (left no comment).
This was delivered timely and was exactly what I ordered.
The receiver perfectly match with my fan. All function works ok with my remote control. The only cons is the receiver sensitivity, I have to place the remote control to close to the to make it works.
My fan had stopped working and fortunately the replacement receiver worked. I really like the fan. Without this part I would have had to buy a new fan.
Excellent Service and product. Thank you for the follow emails and service.
Easy to replace. Works great!
Works great!!!
Delivered fast. Works great
Great help and service. Very fast service
Excellent. Fan works as new.