FAN35T Remote Control for Harbor Breeze Ceiling Fan

$19.95Price

100% Compatibility Guaranteed. The Anderic FAN35T remote will replace your original Harbor Breeze 35T original equipment remote. This remote has a dip-switch panel inside battery compartment for pairing with your ceiling fan receiver. It also has the option to learn via the learn button for FAN30R receivers only. 

  • 100% Compatibility Guaranteed. The Anderic FAN35T remote will replace your original Harbor Breeze 35T original equipment remote. This remote has a dip-switch panel inside battery compartment for pairing with your ceiling fan receiver. It also has the option to learn via the learn button (only for the FAN30R receiver). 


    Pairing notes: Pairing is done by arranging the dip-switches inside the battery compartment to match those of the receiver. Learning button is not used unless you are pairing the FAN35T remote with the FAN30R receiver. Pairing via the learn button will not work for any other receiver that requires the pressing of the learn key. If your receiver inside fan does have dip-switches, the FAN35T for Harbor Breeze will work simply by aligning the dip-switches to match (no need to press learn button to pair). If your receiver has dip-switches, and your original 35T remote does not have dip-switches, but instead, only a Learn button, this remote will not work, you must purchase a new kit as we do not have the remote for you available (we recommend the RR7079TKIT Universal ceiling fan kit). 


    Color: Ivory

    ASSOCIATED NUMBERS: 

    • FCC ID: L3HFAN35T for Harbor Breeze1

    • 303.9MHz Frequency

    • REQUIRES BATTERY TYPE: 23A12V (NOT INCLUDED, YOU MAY ADD THE BATTERY TO CART FROM CART PAGE).


    Programming instructions:
    If the fan has a receiver with 4 dip-switches do the following steps to pair remote:
    1. Align switches inside battery compartment of remote to match the dip switches on receiver (located in the fan)
    You're done.
    -----
    WARNING: If receiver in fan does NOT have dip-switches, this remote will not work (unless your receiver model is "FAN30R").

     

    Below instructions is for FAN30R reciever pairing:
    A. Align “DIP” switches on any pattern on FAN35T for Harbor Breeze remote. 
    B. Turn on the Ceiling Fan main power switch and within 30 seconds after Ceiling Fan power is on,
    C. Then push “Learn” key for 3 to 5 seconds on FAN35T for Harbor Breeze.
    D. Then the Lights on the Ceiling Fan will blink 2 times (or fan speed turns to MEDIUM speed). It means your setting is good.Test rest of button to make sure they work. 
    -----
    If above doesn't work, try pressing and holding the OFF and LIGHT keys simultaneously for up to 10 seconds, lights should blink to confirm pairing. 

    Note: Again, the FAN35T remote only works via learning method if you fan comes with the FAN30R receivers installed. HOW TO TELL: If you have the original remote, and the original remote only has the learning key and no dip switches, then that is a good way to tell that this FAN35T remote will not be compatible with your fan.

    If you have a second fan with the same remote:
    A. Align DIP switches on FAN35T for Harbor Breeze to a different pattern than the first fan.
    B. C. D. steps are same as above.

© 2016 by Anderic. Anderic® is a registered trademark of Dan's Electronics Etc., Inc. All images are copyrighted and may not be used without our prior written consent. All manufacturer's images, logos, text and/or brand names are copyright of the respective holder. Anderic® is in no way affiliated with them.

Winston Salem, NC | Phone: 1-855-ANDERIC | service@Anderic.com
  • Facebook - White Circle
  • YouTube - White Circle