{"title":"Anderic Substitute Products","description":null,"products":[{"product_id":"rrp7010-for-mitsubishi-tvs","title":"Anderic Substitute for Mitsubishi 290P137010 TV Remote Control (RRP7010) [RRU401-2657]","description":"\u003cp\u003eThe Anderic RRU401 is a substitute for the Mitsubishi 290P137010 (RRP7010). It is a 4-device infrared universal remote with backlight, macros and learning.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRU401-2657\u003c\/li\u003e\n\u003cli\u003eInfrared (IR); point it at the device\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eBattery door: secured with a screw\u003c\/li\u003e\n\u003cli\u003eControls up to 4 devices: TV, cable\/satellite box, streaming player, DVD, audio and more\u003c\/li\u003e\n\u003cli\u003eBacklit keypad with adjustable on time (3 to 10 seconds) and brightness\u003c\/li\u003e\n\u003cli\u003eLearning: copies individual keys from your old remote, one key at a time\u003c\/li\u003e\n\u003cli\u003eMacros: up to 5 macro keys with up to 15 steps each, plus combined power to switch several devices on or off with one press\u003c\/li\u003e\n\u003cli\u003eCode display reads back a saved code; volume, channel and media punch-through and a device mode lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt is a universal remote: it must be programmed for your Mitsubishi TV with a code before use.\u003c\/li\u003e\n\u003cli\u003eKey names and layout differ from the original, and some Mitsubishi-specific keys have no match.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Dish Hopper 3, Roku sticks or Roku TVs without an IR receiver, or Amazon Fire TV Stick.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003eBatteries are not included. Not compatible with Dish Hopper 3, Roku Streaming Sticks or Roku TVs without an IR receiver, or the Amazon Fire TV Stick. DirecTV boxes must be set to IR mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling the batteries\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the screw with a Phillips screwdriver, then slide the battery door down toward the bottom.\u003c\/li\u003e\n\u003cli\u003eInsert 2 AAA batteries, matching polarity.\u003c\/li\u003e\n\u003cli\u003eReplace the battery door and screw.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCode input method\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTurn on the device you want to control.\u003c\/li\u003e\n\u003cli\u003eFind your TV's code. For Mitsubishi TVs, start with 2657, 2745, 2767, 2520, 2523, 2456 (more Mitsubishi codes are in the RRU401 code list).\u003c\/li\u003e\n\u003cli\u003ePress and hold the mode key (for example TV) for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003eKey in the 4-digit code. If valid, the mode light turns off immediately. If invalid, it blinks three times rapidly and turns off; try again.\u003c\/li\u003e\n\u003cli\u003eCheck that most keys work. If not, try another code for the same brand, or use a search method below. The remote exits programming after 20 seconds with no key press.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAuto code search\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTurn on the device.\u003c\/li\u003e\n\u003cli\u003ePress and hold the mode key for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003ePress and release CH+ or CH− to scan forward or backward.\u003c\/li\u003e\n\u003cli\u003eWhen the device powers off (or video starts playing), press POWER to save and exit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOne-button search (TV and Cable\/STB only)\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePower on the device.\u003c\/li\u003e\n\u003cli\u003ePress and release the mode key.\u003c\/li\u003e\n\u003cli\u003ePress and hold the number key for your brand (see the brand list in the guide) until the device powers off, then release. After 3 seconds the mode light goes out and then flashes about once per second while searching.\u003c\/li\u003e\n\u003cli\u003eCheck that most keys work; if not, repeat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCode display\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and release the mode key.\u003c\/li\u003e\n\u003cli\u003ePress MENU and 1; count the mode key flashes for the first digit. Repeat with MENU and 2, 3 and 4. No flash means 0.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eLearning\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and hold the mode key for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003ePress and release MENU; the mode key blinks slowly (learning mode).\u003c\/li\u003e\n\u003cli\u003ePress and release the key you want to learn; the mode light stays on.\u003c\/li\u003e\n\u003cli\u003ePoint the remotes at each other about 2 inches apart, with the IR LEDs aligned.\u003c\/li\u003e\n\u003cli\u003ePress and hold the matching key on the old remote until the mode light blinks three times, then flashes slowly (learned). If it flashes twice quickly, learning failed (memory may be full); delete some learned keys and start again.\u003c\/li\u003e\n\u003cli\u003eRepeat steps 3–5, then press the mode key to save and exit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eDelete all learned keys (all devices)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHold any mode key about 3 seconds until the light stays on, release, then key in 9 9 8 8. The mode light blinks twice slowly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReset to factory default\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHold any mode key about 3 seconds until the light stays on, release, then key in 9 9 9 9. All mode lights stay lit for about 3 seconds, then turn off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTroubleshooting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf all mode keys blink together when you press buttons and the remote does not respond, replace the batteries.\u003c\/p\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf all the mode keys blink together when you press a button and the remote does not respond, the batteries are weak; replace them.\u003c\/li\u003e\n\u003cli\u003eFor a DirecTV box, set the box to IR mode first (Menu \u0026gt; Settings \u0026amp; Help \u0026gt; Settings \u0026gt; Remote Control).\u003c\/li\u003e\n\u003cli\u003eTo start over, reset the remote: hold any mode key until its light stays on, then enter 9 9 9 9.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRU401 universal remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso see: \u003ca href=\"https:\/\/help.anderic.com\/article\/135-rru401-rrur01-code-list\"\u003esetup guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with many Mitsubishi TVs, including models such as 290P109D10, 290P111A20 and 290P116A10.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":47215443050807,"sku":"65242-NEW","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/anderic-rrp7010-mitsubishi-replacement-remote-rru401_1b46736a-ec56-473e-90ef-4f061da6238d.jpg?v=1785421643"},{"product_id":"rr90395-for-toshiba-tvs","title":"Anderic Substitute for Toshiba CT-90395 TV Remote Control [RR90395]","description":"\u003cp\u003eThe Anderic RR90395 is an infrared Toshiba TV remote.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RR90395\u003c\/li\u003e\n\u003cli\u003eInfrared (IR); point it at the device\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIR only: aim it at the device; a clear line of sight is needed; no voice, pointer or Bluetooth functions\u003c\/li\u003e\n\u003cli\u003eIt is a model-specific remote, not a universal remote.\u003c\/li\u003e\n\u003cli\u003eButton layout or shortcut keys may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe may ship the newest model of this remote.\u003c\/p\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInsert the batteries, matching the polarity marks.\u003c\/li\u003e\n\u003cli\u003ePoint the remote at the device; infrared remotes are not paired.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR90395 remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eToshiba CT-90395\u003c\/li\u003e\n\u003cli\u003eWorks with many Toshiba TVs, including models starting with 32A, 13A, 27A and 26HL.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":47215449932087,"sku":"79134-NEW","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/rr90395-for-toshiba-tvs_01.jpg?v=1762198420"},{"product_id":"rrxrt112-for-vizio-tvs","title":"Anderic Substitute for Vizio RRXRT112 Remote Control for Vizio TV | XRT112 [RRXRT303]","description":"\u003cp\u003eThe Anderic RRXRT303 is a substitute for the Vizio RRXRT112 remote. It is an infrared Vizio TV remote with a QWERTY keyboard on the back. It works with TVs such as E320iA0.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRXRT303\u003c\/li\u003e\n\u003cli\u003eInfrared (IR); point it at the device\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIR only: no voice or Bluetooth\u003c\/li\u003e\n\u003cli\u003eWorks with Vizio TVs only; some shortcut keys from your old remote may be missing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe may ship the newest model of this remote.\u003c\/p\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003ePre-programmed: no setup required, just insert batteries.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRXRT303 remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVizio RRXRT112\u003c\/li\u003e\n\u003cli\u003eWorks with many Vizio TVs, including models such as 401IA3, E241IA1 and E280IB1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Substitute (RRXRT303)","offer_id":50305796473143,"sku":"90250-NEW-2","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/anderic-vizio-replacement-remote-control_a3e04ff7-cf96-48c8-9156-61a9f31ef132.jpg?v=1786996210"},{"product_id":"anderic-fan53tb-universal-3-speed-with-receiver-315mhz-ceiling-fan-remote-control-kit","title":"Anderic Substitute Kit for FAN53TB \/ FAN42R 315MHz Ceiling Fan Remote Kit [63T-AC83T-KIT]","description":"\u003cp\u003eThe Anderic 63T-AC83T-KIT is a substitute kit for the FAN53TB \/ FAN42R 315 MHz kit: a matched ceiling fan remote and receiver with 16 dip codes.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKit: Anderic 63T-AC83T-KIT\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 314.92 MHz\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eFor AC ceiling fans only; not for DC or solid-state fans\u003c\/li\u003e\n\u003cli\u003eSupply: 110\/120 V, 60 Hz; maximum fan motor 1.0 A; maximum light 190 W (incandescent or LED)\u003c\/li\u003e\n\u003cli\u003eSeparate fan and light control: HIGH, MEDIUM, LOW and fan power keys\u003c\/li\u003e\n\u003cli\u003eLight key: press for on\/off, press and hold to dim; the receiver remembers the brightness\u003c\/li\u003e\n\u003cli\u003eTimer key for a 2, 4 or 8 hour light delay, shown by an LED on the remote\u003c\/li\u003e\n\u003cli\u003e16 dip-switch code combinations to avoid interference with nearby fans\u003c\/li\u003e\n\u003cli\u003eOne remote can run two fans, or two remotes can run one fan, by matching dip switches\u003c\/li\u003e\n\u003cli\u003eWorks with fans that have no light kit (leave the blue light wire unconnected)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt comes with its own remote and receiver. It does not pair with an existing 315 MHz FAN53TB remote or FAN42R receiver; replace both.\u003c\/li\u003e\n\u003cli\u003eThe receiver must be wired into the fan canopy.\u003c\/li\u003e\n\u003cli\u003eIt pairs by dip switches, not by learning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. Install the receiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTurn the power off at the circuit breaker or remove the fuse. A qualified electrician is recommended. Make sure the receiver fits in your fan canopy before you start.\u003c\/li\u003e\n\u003cli\u003eIf your fan has pull chains, set the fan chain to high speed and turn the light chain on.\u003c\/li\u003e\n\u003cli\u003eSet the receiver's 4 code switches to a pattern of your choice and note it. The factory setting is all up; we suggest not using it.\u003c\/li\u003e\n\u003cli\u003eRemove the fan canopy from the mounting bracket and disconnect the existing wiring between the fan and the ceiling junction box.\u003c\/li\u003e\n\u003cli\u003eConnect the receiver with the supplied wire nuts: green fan wire to the bare (ground) supply wire; black receiver wire AC IN L to the black wire from the ceiling; white receiver wire AC IN N to the white wire from the ceiling; white receiver wire TO MOTOR N to the white fan wire; black receiver wire TO MOTOR L to the black fan wire; blue receiver wire FOR LIGHT to the blue fan wire. If your wires are different colors, have a licensed electrician install it.\u003c\/li\u003e\n\u003cli\u003ePush the connections up into the junction box, lay the brown antenna wire on top of the receiver, set the receiver in the mounting bracket and reinstall the canopy.\u003c\/li\u003e\n\u003cli\u003eRestore power.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e2. Pair the remote\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress firmly on the arrow and slide the remote's battery cover off.\u003c\/li\u003e\n\u003cli\u003eWith a small screwdriver or pen tip, slide the remote's 4 code switches to exactly the same pattern as the receiver. The two only work together when the patterns match.\u003c\/li\u003e\n\u003cli\u003eInsert 2 AAA batteries (not included) and replace the battery cover.\u003c\/li\u003e\n\u003cli\u003eTest: press the fan speed keys, the power key and the light key. The blue indicator on the remote lights with each key press, and the fan and light respond.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemote does not work: check that the receiver has power and the wall switch is on, the wiring is correct, any pull chains are on high with the light on, the batteries are in correctly, and the code switches match on the remote and receiver.\u003c\/li\u003e\n\u003cli\u003eFan or light turns on and off by itself: another RF remote is interfering; set a new matching pattern on both the remote and the receiver.\u003c\/li\u003e\n\u003cli\u003eShort range: route the brown antenna wire higher, outside the junction box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 remote and 1 receiver (63T-AC83T-KIT)\u003c\/li\u003e\n\u003cli\u003eWall mount holder and 2 screws\u003c\/li\u003e\n\u003cli\u003eWire nuts for the receiver\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with many ceiling fans, including models starting with TG44, TG52 and BRD60.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":50325335572791,"sku":"87949-NEW","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/anderic-universal-ceiling-fan-remote-kit_f75ceda9-4fff-414b-814a-c146ef8faabc.jpg?v=1783465127"},{"product_id":"fan42r-315mhz-ceiling-fan-receiver","title":"Anderic Substitute Kit for Harbor Breeze FAN42R Ceiling Fan Receiver | 315MHz, FAN-42R [63T-AC83T-KIT]","description":"\u003cp\u003eThe Anderic 63T-AC83T-KIT is a substitute kit for the Harbor Breeze FAN42R receiver: a matched ceiling fan remote and receiver with 16 dip codes.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKit: Anderic 63T-AC83T-KIT\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 314.92 MHz\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eFor AC ceiling fans only; not for DC or solid-state fans\u003c\/li\u003e\n\u003cli\u003eSupply: 110\/120 V, 60 Hz; maximum fan motor 1.0 A; maximum light 190 W (incandescent or LED)\u003c\/li\u003e\n\u003cli\u003eSeparate fan and light control: HIGH, MEDIUM, LOW and fan power keys\u003c\/li\u003e\n\u003cli\u003eLight key: press for on\/off, press and hold to dim; the receiver remembers the brightness\u003c\/li\u003e\n\u003cli\u003eTimer key for a 2, 4 or 8 hour light delay, shown by an LED on the remote\u003c\/li\u003e\n\u003cli\u003e16 dip-switch code combinations to avoid interference with nearby fans\u003c\/li\u003e\n\u003cli\u003eOne remote can run two fans, or two remotes can run one fan, by matching dip switches\u003c\/li\u003e\n\u003cli\u003eWorks with fans that have no light kit (leave the blue light wire unconnected)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt comes with its own remote and receiver. It does not pair with an existing 315 MHz FAN53TB remote or FAN42R receiver; replace both.\u003c\/li\u003e\n\u003cli\u003eThe receiver must be wired into the fan canopy.\u003c\/li\u003e\n\u003cli\u003eIt pairs by dip switches, not by learning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. Install the receiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTurn the power off at the circuit breaker or remove the fuse. A qualified electrician is recommended. Make sure the receiver fits in your fan canopy before you start.\u003c\/li\u003e\n\u003cli\u003eIf your fan has pull chains, set the fan chain to high speed and turn the light chain on.\u003c\/li\u003e\n\u003cli\u003eSet the receiver's 4 code switches to a pattern of your choice and note it. The factory setting is all up; we suggest not using it.\u003c\/li\u003e\n\u003cli\u003eRemove the fan canopy from the mounting bracket and disconnect the existing wiring between the fan and the ceiling junction box.\u003c\/li\u003e\n\u003cli\u003eConnect the receiver with the supplied wire nuts: green fan wire to the bare (ground) supply wire; black receiver wire AC IN L to the black wire from the ceiling; white receiver wire AC IN N to the white wire from the ceiling; white receiver wire TO MOTOR N to the white fan wire; black receiver wire TO MOTOR L to the black fan wire; blue receiver wire FOR LIGHT to the blue fan wire. If your wires are different colors, have a licensed electrician install it.\u003c\/li\u003e\n\u003cli\u003ePush the connections up into the junction box, lay the brown antenna wire on top of the receiver, set the receiver in the mounting bracket and reinstall the canopy.\u003c\/li\u003e\n\u003cli\u003eRestore power.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e2. Pair the remote\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress firmly on the arrow and slide the remote's battery cover off.\u003c\/li\u003e\n\u003cli\u003eWith a small screwdriver or pen tip, slide the remote's 4 code switches to exactly the same pattern as the receiver. The two only work together when the patterns match.\u003c\/li\u003e\n\u003cli\u003eInsert 2 AAA batteries (not included) and replace the battery cover.\u003c\/li\u003e\n\u003cli\u003eTest: press the fan speed keys, the power key and the light key. The blue indicator on the remote lights with each key press, and the fan and light respond.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemote does not work: check that the receiver has power and the wall switch is on, the wiring is correct, any pull chains are on high with the light on, the batteries are in correctly, and the code switches match on the remote and receiver.\u003c\/li\u003e\n\u003cli\u003eFan or light turns on and off by itself: another RF remote is interfering; set a new matching pattern on both the remote and the receiver.\u003c\/li\u003e\n\u003cli\u003eShort range: route the brown antenna wire higher, outside the junction box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 remote and 1 receiver (63T-AC83T-KIT)\u003c\/li\u003e\n\u003cli\u003eWall mount holder and 2 screws\u003c\/li\u003e\n\u003cli\u003eWire nuts for the receiver\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eListed for the Harbor Breeze FAN42R receiver. Works on 3-speed AC ceiling fans\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":47215463268663,"sku":"87763-NEW","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/anderic-fan42r-ceiling-fan-receiver.jpg?v=1783465133"},{"product_id":"mr77a-2-uc7305r-replacement-ceiling-fan-receiver","title":"Anderic Substitute for MR77A.2 (Old Style) Ceiling Fan Receiver for Hampton Bay Altura 68 Inch | UC7305R [MR77A]","description":"\u003cp\u003eThe MR77A is a ceiling fan receiver designed for Hampton Bay Altura 68 inch models and UC7305R systems. This old-style receiver module controls fan speed and light functions through wireless remote operation. Ideal for replacement or repair of non-functioning receiver units in supported Hampton Bay fan models. This receiver works with the RR7222T434 remote control, sold separately. \u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":50324882358583,"sku":"189192-NEW","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/anderic-ceiling-fan-receiver-replacement.png?v=1790020225"},{"product_id":"amana-ac562044-air-conditioner-remote-control","title":"Anderic Substitute for Haier \/ Amana AC-5620-44 Portable Air Conditioner Remote Control [RR2054]","description":"\u003cp\u003eThe Anderic RR2054 is a substitute for the Haier AC-5620-44 remote. It is a remote compatible with portable air conditioners\/dehumidifiers (no programming). It works with Amana air conditioners such as AP077R.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RR2054\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo Heat mode\u003c\/li\u003e\n\u003cli\u003eCompatibility depends on the model list in the instructions\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInsert two AAA batteries, matching polarity.\u003c\/li\u003e\n\u003cli\u003eNo programming is needed; aim at the unit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR2054 remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHaier AC-5620-44\u003c\/li\u003e\n\u003cli\u003eAlso works with: CPRB07XC7\u003c\/li\u003e\n\u003cli\u003eSupplied with: AP077R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680291627319,"sku":"64568-NEW","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/amana-ac562044-air-conditioner-remote-control_01_29d2d136-5c30-4a05-856d-cc87ddea0920.jpg?v=1781725225"},{"product_id":"accessmaster-33lm-3-button-visor-390mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 33LM 3-Button Visor 390mhz Garage Door Opener Remote Control [375UT]","description":"\u003cp\u003eThe 375UT is a compatible substitute for AccessMaster 33LM 3-Button Visor.\u003cbr\u003e\u003cbr\u003eThe Anderic 375UT-2BUTTON is a universal 2-button garage and gate remote. Each button programs on its own, so one remote can run two openers, two gates, or one of each. It covers learn-button and dip-switch systems on 300, 310, 315, 318, 372, and 390 MHz.\u003cbr\u003e\u003cbr\u003eCompatibility\u003cbr\u003e\u003cbr\u003e• Chamberlain, LiftMaster, Sears Craftsman, Genie, Overhead Door, Linear, Wayne Dalton, and Stanley\u003cbr\u003e• Access Master, Do-It, Gatheron, Link Control, Master Mechanic, Raynor, Steed Craft, and True Value use the same press counts as Chamberlain, LiftMaster, and Craftsman\u003cbr\u003e• Match the learn-button color or dip-switch type on the motor head\u003cbr\u003e• Will not pair to an opener with no Learn button and no dip switches\u003cbr\u003e• For a home garage, use only with openers built from January 1, 1993 that have photo-eye sensors\u003cbr\u003e\u003cbr\u003eLearn-button pairing\u003cbr\u003e\u003cbr\u003eStart with the door closed. Do not hold the opener Learn button. A long press can clear every remote already saved.\u003cbr\u003e\u003cbr\u003e1. Slide the battery cover down. Press and hold PROGRAM inside the battery compartment until the light comes on, then release it.\u003cbr\u003e2. Press and release the Learn or Smart button on the opener once.\u003cbr\u003e3. Press and release the remote button you want to use the number of times shown on the compatibility chart. Wait until the remote light stops flashing before the next press.\u003cbr\u003e4. Press PROGRAM again to save, then test. A click, a light flash, or the door moving means it took.\u003cbr\u003e\u003cbr\u003eDip-switch pairing\u003cbr\u003e\u003cbr\u003e• Match the switches inside the battery door to the opener\u003cbr\u003e• The remote has 12 switches. If the opener has fewer, match the first switches and leave the rest alone\u003cbr\u003e• If a 2-position set will not pair, flip every switch and try again\u003cbr\u003e• Press PROGRAM until the light comes on, press the front button the count on the chart, then press PROGRAM to save\u003cbr\u003e\u003cbr\u003ePress counts for every learn-button color and dip-switch system are on the compatibility chart image.\u003cbr\u003e\u003cbr\u003eIn the box\u003cbr\u003e\u003cbr\u003e• 375UT 2-button remote\u003cbr\u003e• Visor clip\u003cbr\u003e• CR2032 battery required, not included\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680342614327,"sku":"78385-NEW","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/anderic-3-button-garage-door-remote_f2c2a0db-f01f-47a3-a03d-dbeb0c8b0466.png?v=1791401530"},{"product_id":"accessmaster-361lm-1-button-visor-315-mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 361LM 1-Button Visor 315 Mhz Garage Door Opener Remote Control [375UT]","description":"\u003cp\u003eThe 375UT is a compatible substitute for AccessMaster 361LM 1-Button Visor 315 Mhz.\u003cbr\u003e\u003cbr\u003eThe Anderic 375UT-2BUTTON is a universal 2-button garage and gate remote. Each button programs on its own, so one remote can run two openers, two gates, or one of each. It covers learn-button and dip-switch systems on 300, 310, 315, 318, 372, and 390 MHz.\u003cbr\u003e\u003cbr\u003eCompatibility\u003cbr\u003e\t•\tChamberlain, LiftMaster, Sears Craftsman, Genie, Overhead Door, Linear, Wayne Dalton, and Stanley\u003cbr\u003e\t•\tAccess Master, Do-It, Gatheron, Link Control, Master Mechanic, Raynor, Steed Craft, and True Value use the same press counts as Chamberlain, LiftMaster, and Craftsman\u003cbr\u003e\t•\tMatch the learn-button color or dip-switch type on the motor head\u003cbr\u003e\t•\tWill not pair to an opener with no Learn button and no dip switches\u003cbr\u003e\t•\tFor a home garage, use only with openers built from January 1, 1993 that have photo-eye sensors\u003cbr\u003e\u003cbr\u003eLearn-button pairing\u003cbr\u003eStart with the door closed. Do not hold the opener Learn button. A long press can clear every remote already saved.\u003cbr\u003e\t1\tSlide the battery cover down. Press and hold PROGRAM inside the battery compartment until the light comes on, then release it.\u003cbr\u003e\t2\tPress and release the Learn or Smart button on the opener once.\u003cbr\u003e\t3\tPress and release the remote button you want to use the number of times shown on the compatibility chart. Wait until the remote light stops flashing before the next press.\u003cbr\u003e\t4\tPress PROGRAM again to save, then test. A click, a light flash, or the door moving means it took.\u003cbr\u003e\u003cbr\u003eDip-switch pairing\u003cbr\u003e\t•\tMatch the switches inside the battery door to the opener\u003cbr\u003e\t•\tThe remote has 12 switches. If the opener has fewer, match the first switches and leave the rest alone\u003cbr\u003e\t•\tIf a 2-position set will not pair, flip every switch and try again\u003cbr\u003e\t•\tPress PROGRAM until the light comes on, press the front button the count on the chart, then press PROGRAM to save\u003cbr\u003e\u003cbr\u003ePress counts for every learn-button color and dip-switch system are on the compatibility chart image.\u003cbr\u003e\u003cbr\u003eIn the box\u003cbr\u003e\t•\t375UT 2-button remote\u003cbr\u003e\t•\tVisor clip\u003cbr\u003e\t•\tCR2032 battery required, not included\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680344744247,"sku":"78386-NEW","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/access-master_361lm-digital-code-switch-remote-315mhz_2_698518f7-5804-40c7-a755-d2f692b6bf7f.jpg?v=1784573477"},{"product_id":"accessmaster-372ac-2-button-vizor-315-mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 372AC 2-Button Vizor 315 MHz Garage Door Opener Remote Control [373LM]","description":"\u003cp\u003eThe Anderic 373LM is a substitute for the AccessMaster 372AC remote. It is a 3-button visor remote for LiftMaster Security+ purple-learn-button openers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic 373LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 315 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpener must be a compatible model\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eThe AccessMaster 372AC is a 2-button remote. This remote has 3 buttons.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePress and release the Learn key on the motor unit; do not hold it, because holding erases all codes. The learn indicator light glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the button on the remote.\u003c\/li\u003e\n\u003cli\u003eRelease the button when the motor unit light blinks; it has learned the code. If no light bulbs are installed, you will hear two clicks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic 373LM remote\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessMaster 372AC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680346251575,"sku":"78388-NEW","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/access-master_372lm_2_a7e67c6f-ed12-490c-8d79-21e109c82ee1.jpg?v=1784911693"},{"product_id":"accessmaster-373p-premium-3-button-vizor-315-mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 373P Premium 3-Button Vizor 315 MHz Garage Door Opener Remote Control [373LM]","description":"\u003cp\u003eThe Anderic 373LM is a substitute for the AccessMaster 373P remote. It is a 3-button visor remote for LiftMaster Security+ purple-learn-button openers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic 373LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 315.001 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpener must be a compatible model\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePress and release the Learn key on the motor unit; do not hold it, because holding erases all codes. The learn indicator light glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the button on the remote.\u003c\/li\u003e\n\u003cli\u003eRelease the button when the motor unit light blinks; it has learned the code. If no light bulbs are installed, you will hear two clicks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic 373LM remote\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessMaster 373P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680348119351,"sku":"78390-NEW","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/access-master_373p-premium-315mhz-remote_2_aefe9d5e-c747-4099-aed5-608c9061a8d5.jpg?v=1784911697"},{"product_id":"accessmaster-374lm-4-button-vizor-315mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 374LM 4 Button Vizor 315mhz Garage Door Opener Remote Control [893MAX]","description":"\u003cp\u003eThe Anderic 893MAX is a substitute for the AccessMaster 374LM remote. It is a 3-button visor garage door remote for LiftMaster Learn-button openers (purple, yellow, green, red, orange).\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic 893MAX\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 315 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpener must be compatible; press count depends on opener type\u003c\/li\u003e\n\u003cli\u003eNot for every rolling-code system\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eThe AccessMaster 374LM is a 4-button remote. This remote has 3 buttons.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eProgramming the remote\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and hold the program button on the remote control until the LED on the front of the remote control turns on.\u003c\/li\u003e\n\u003cli\u003ePress and release the remote control button you wish to use the number of times that corresponds with your garage door opener type (see the chart below).\u003c\/li\u003e\n\u003cli\u003eTo exit programming mode, press any remote control button except the button that was last programmed.\u003c\/li\u003e\n\u003cli\u003ePress and release the Learn button on the garage door opener.\u003c\/li\u003e\n\u003cli\u003ePress the remote control button programmed in step 2 until the garage door opener lights flash or two clicks are heard.\u003c\/li\u003e\n\u003cli\u003eTo test, press the programmed button on the remote control.\u003c\/li\u003e\n\u003cli\u003eInstall the visor clip.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of presses\u003c\/th\u003e\n\u003cth\u003eGarage door opener type\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eSecurity+ 2.0 (yellow Learn button)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e315 MHz Security+ (purple Learn button)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e390 MHz Security+ (red\/orange Learn button)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e390 MHz Billion Code (green Learn button)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eUsing the remote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePress and hold the button until the door or gate starts to move. The remote operates from up to 3 car lengths away on typical installations; installations and conditions vary. Additional buttons can be programmed to operate up to 3 devices, such as additional garage door openers, light controls, gate operators or access control systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe battery is not included. The LED on the remote stops flashing when the battery is low and needs to be replaced. Insert the battery positive side up (+).\u003c\/p\u003e\n\u003cp\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic 893MAX remote\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessMaster 374LM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680350019895,"sku":"78391-NEW","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/access-master_374lm-4-button-315mhz-vizor-size_2_8fc2467b-be23-471d-a355-110710dd2b78.jpg?v=1784907759"},{"product_id":"accessmaster-61lm-1-button-visor-390-mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 61LM 1-Button Visor 390 MHz Garage Door Opener Remote Control [375UT]","description":"\u003cp\u003eThe 375UT is a compatible substitute for AccessMaster 61LM 1-Button Visor 390 MHz Garage Door Opener Remote Control.\u003cbr\u003e\u003cbr\u003eThe Anderic 375UT-2BUTTON is a universal 2-button garage and gate remote. Each button programs on its own, so one remote can run two openers, two gates, or one of each. It covers learn-button and dip-switch systems on 300, 310, 315, 318, 372, and 390 MHz.\u003cbr\u003e\u003cbr\u003eCompatibility\u003cbr\u003e\t•\tChamberlain, LiftMaster, Sears Craftsman, Genie, Overhead Door, Linear, Wayne Dalton, and Stanley\u003cbr\u003e\t•\tAccess Master, Do-It, Gatheron, Link Control, Master Mechanic, Raynor, Steed Craft, and True Value use the same press counts as Chamberlain, LiftMaster, and Craftsman\u003cbr\u003e\t•\tMatch the learn-button color or dip-switch type on the motor head\u003cbr\u003e\t•\tWill not pair to an opener with no Learn button and no dip switches\u003cbr\u003e\t•\tFor a home garage, use only with openers built from January 1, 1993 that have photo-eye sensors\u003cbr\u003e\u003cbr\u003eLearn-button pairing\u003cbr\u003eStart with the door closed. Do not hold the opener Learn button. A long press can clear every remote already saved.\u003cbr\u003e\t1\tSlide the battery cover down. Press and hold PROGRAM inside the battery compartment until the light comes on, then release it.\u003cbr\u003e\t2\tPress and release the Learn or Smart button on the opener once.\u003cbr\u003e\t3\tPress and release the remote button you want to use the number of times shown on the compatibility chart. Wait until the remote light stops flashing before the next press.\u003cbr\u003e\t4\tPress PROGRAM again to save, then test. A click, a light flash, or the door moving means it took.\u003cbr\u003e\u003cbr\u003eDip-switch pairing\u003cbr\u003e\t•\tMatch the switches inside the battery door to the opener\u003cbr\u003e\t•\tThe remote has 12 switches. If the opener has fewer, match the first switches and leave the rest alone\u003cbr\u003e\t•\tIf a 2-position set will not pair, flip every switch and try again\u003cbr\u003e\t•\tPress PROGRAM until the light comes on, press the front button the count on the chart, then press PROGRAM to save\u003cbr\u003e\u003cbr\u003ePress counts for every learn-button color and dip-switch system are on the compatibility chart image.\u003cbr\u003e\u003cbr\u003eIn the box\u003cbr\u003e\t•\t375UT 2-button remote\u003cbr\u003e\t•\tVisor clip\u003cbr\u003e\t•\tCR2032 battery required, not included\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680352313655,"sku":"78392-NEW","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/accessmaster-61lm-1-button-visor-390-mhz-garage-door-opener-remote-control_01_8fa79e76-79cc-4bb1-8f3f-bc8b90dd13a7.jpg?v=1784573481"},{"product_id":"accessmaster-972lm-92lm-2-button-vizor-390mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 972LM \/ 92LM 2-Button Vizor 390MHz Garage Door Opener Remote Control [973LM]","description":"\u003cp\u003eThe Anderic 973LM is a substitute for the AccessMaster 972LM \/ 92LM remote. It is a 3-button visor garage door remote for 390 MHz Security+ openers with a red or orange Learn button.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic 973LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 390 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt works only with red or orange Learn button openers. It is not compatible with openers or remotes that use code (dip) switches, and it is not for yellow, purple or green Learn button openers\u003c\/li\u003e\n\u003cli\u003eThe AccessMaster 972LM \/ 92LM has 2 buttons; this remote has 3.\u003c\/li\u003e\n\u003cli\u003eKey names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClose the garage door and stand close to the opener.\u003c\/li\u003e\n\u003cli\u003eLocate the red or orange Learn button on the garage door opener.\u003c\/li\u003e\n\u003cli\u003ePress and immediately release the Learn button. The Learn LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to use.\u003c\/li\u003e\n\u003cli\u003eRelease the button when the garage door opener lights blink or two clicks are heard.\u003c\/li\u003e\n\u003cli\u003ePress the button you programmed to test it. The garage door opener activates.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic 973LM remote\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessMaster 972LM \/ 92LM\u003c\/li\u003e\n\u003cli\u003eWorks with many LiftMaster, Chamberlain and Craftsman garage door openers, including models such as 950CB, 953CB, 139.53661 and 139.53677SRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":51744957268279,"sku":"78394-NEW","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/access-master_972lm-security-plus-2-button-vizor-size_2_961d9e28-6616-4e90-a0c9-305506d7409c.jpg?v=1784906561"},{"product_id":"accessmaster-973lm-3-button-vizor-390-mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 973LM 3-Button Vizor 390 MHz Garage Door Opener Remote Control [973LM]","description":"\u003cp\u003eThe Anderic 973LM is a substitute for the AccessMaster 973LM remote. It is a 3-button visor garage door remote for 390 MHz Security+ openers with a red or orange Learn button. It works with AccessMaster garage door openers such as Sears Craftsman 139.53661, Sears Craftsman 139.53661SRT and Sears Craftsman 139.53661SRT3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic 973LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 390 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt works only with red or orange Learn button openers. It is not compatible with openers or remotes that use code (dip) switches, and it is not for yellow, purple or green Learn button openers\u003c\/li\u003e\n\u003cli\u003eKey names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClose the garage door and stand close to the opener.\u003c\/li\u003e\n\u003cli\u003eLocate the red or orange Learn button on the garage door opener.\u003c\/li\u003e\n\u003cli\u003ePress and immediately release the Learn button. The Learn LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to use.\u003c\/li\u003e\n\u003cli\u003eRelease the button when the garage door opener lights blink or two clicks are heard.\u003c\/li\u003e\n\u003cli\u003ePress the button you programmed to test it. The garage door opener activates.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic 973LM remote\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessMaster 973LM\u003c\/li\u003e\n\u003cli\u003eWorks with many LiftMaster, Chamberlain and Craftsman garage door openers, including models such as 950CB, 953CB, 139.53661 and 139.53661SRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":51744996393271,"sku":"78395-NEW","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/access-master_973lm-security-plus-3-button-vizor-size_2_ecfc2a57-d213-43e9-954e-f9bcb0a325bd.jpg?v=1784906565"},{"product_id":"accessmaster-974lm-94lm-4-button-vizor-390-mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 974LM \/ 94LM 4-button Vizor 390 MHz Garage Door Opener Remote Control [973LM]","description":"\u003cp\u003eThe Anderic 973LM is a substitute for the AccessMaster 974LM \/ 94LM remote. It is a 3-button visor garage door remote for 390 MHz Security+ openers with a red or orange Learn button.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic 973LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 390 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt works only with red or orange Learn button openers. It is not compatible with openers or remotes that use code (dip) switches, and it is not for yellow, purple or green Learn button openers\u003c\/li\u003e\n\u003cli\u003eThe AccessMaster 974LM \/ 94LM has 4 buttons; this remote has 3.\u003c\/li\u003e\n\u003cli\u003eKey names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClose the garage door and stand close to the opener.\u003c\/li\u003e\n\u003cli\u003eLocate the red or orange Learn button on the garage door opener.\u003c\/li\u003e\n\u003cli\u003ePress and immediately release the Learn button. The Learn LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to use.\u003c\/li\u003e\n\u003cli\u003eRelease the button when the garage door opener lights blink or two clicks are heard.\u003c\/li\u003e\n\u003cli\u003ePress the button you programmed to test it. The garage door opener activates.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic 973LM remote\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessMaster 974LM \/ 94LM\u003c\/li\u003e\n\u003cli\u003eWorks with many LiftMaster, Chamberlain and Craftsman garage door openers, including models such as 950CB, 953CB, 139.53661 and 139.53677SRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":51745314767159,"sku":"78396-NEW","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/access-master_974lm-security-plus-4-button-vizor-size_2_fd2afe03-0aef-42a2-880d-d069404ceadc.jpg?v=1784906569"},{"product_id":"allstar-110995-quickcode-3-button-318mhz-garage-door-opener-remote-control","title":"Anderic Substitute Kit for Allstar 110995 Quickcode 3 button 318mhz Garage Door Opener Remote Control [RR850LM]","description":"\u003cp\u003eThe Anderic RR850LM is a substitute kit for the Allstar 110995 remote. It is a universal garage-door\/gate opener receiver add-on kit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped kit: Anderic RR850LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit replaces the Allstar radio system. It does not pair with existing 318 MHz Allstar remotes; you install the new receiver and use the kit remote.\u003c\/li\u003e\n\u003cli\u003eWiring is specific to your operator\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the RR850LM receiver first: select a location with access to the terminals and room for the antenna, attach the antenna to the receiver (TV Type F coaxial connector), fasten the receiver with the hook and loop fasteners provided, and wire it to your operator as shown in the wiring section of the RR850LM guide. Then connect power (85LM plug-in or 95LM wired-in transformer, or power from your operator).\u003c\/li\u003e\n\u003cli\u003eHold the Learn button for the receiver channel you want to use. Its LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to program.\u003c\/li\u003e\n\u003cli\u003eRelease the remote button when the receiver LED blinks and then turns off. Programming is complete.\u003c\/li\u003e\n\u003cli\u003eFor separate open, close and stop buttons: hold CH1 Learn and within 30 seconds press the OPEN button; hold CH2 Learn and press the CLOSE button; hold CH3 Learn and press the STOP button.\u003c\/li\u003e\n\u003cli\u003eIf you do not press a remote button within 30 seconds, the LED turns off; repeat the steps.\u003c\/li\u003e\n\u003cli\u003eTest the remote. Only operate the door or gate when you can see it clearly and the path is clear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR850LM kit: receiver, power supply and remote. The GUK-R keypad is not included.\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllstar 110995\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680359522615,"sku":"78397-NEW","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/110995-318mhz-5B53DBCFE469777391BAF9E41900F947_93ce2d0d-fd47-4f8e-bf3e-7266300d9942.jpg?v=1784913667"},{"product_id":"allstar-110925-mvp-series-3-button-318mhz-garage-door-opener-remote-control","title":"Anderic Substitute Kit for Allstar 110925 MVP Series 3 Button 318mhz Garage Door Opener Remote Control [RR850LM]","description":"\u003cp\u003eThe Anderic RR850LM is a substitute kit for the Allstar 110925 remote. It is a universal garage-door\/gate opener receiver add-on kit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped kit: Anderic RR850LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit replaces the Allstar radio system. It does not pair with existing 318 MHz Allstar remotes; you install the new receiver and use the kit remote.\u003c\/li\u003e\n\u003cli\u003eWiring is specific to your operator\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the RR850LM receiver first: select a location with access to the terminals and room for the antenna, attach the antenna to the receiver (TV Type F coaxial connector), fasten the receiver with the hook and loop fasteners provided, and wire it to your operator as shown in the wiring section of the RR850LM guide. Then connect power (85LM plug-in or 95LM wired-in transformer, or power from your operator).\u003c\/li\u003e\n\u003cli\u003eHold the Learn button for the receiver channel you want to use. Its LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to program.\u003c\/li\u003e\n\u003cli\u003eRelease the remote button when the receiver LED blinks and then turns off. Programming is complete.\u003c\/li\u003e\n\u003cli\u003eFor separate open, close and stop buttons: hold CH1 Learn and within 30 seconds press the OPEN button; hold CH2 Learn and press the CLOSE button; hold CH3 Learn and press the STOP button.\u003c\/li\u003e\n\u003cli\u003eIf you do not press a remote button within 30 seconds, the LED turns off; repeat the steps.\u003c\/li\u003e\n\u003cli\u003eTest the remote. Only operate the door or gate when you can see it clearly and the path is clear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR850LM kit: receiver, power supply and remote. The GUK-R keypad is not included.\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllstar 110925\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680360767799,"sku":"78398-NEW","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/allstar-110925-mvp-series-3-button-318mhz-garage-door-opener-remote-control_01_b060b398-23b9-4d5c-a678-4557029811dc.jpg?v=1784913672"},{"product_id":"allstar-111025-288mhz-remote-canadian-version-garage-door-opener-remote-control","title":"Anderic Substitute Kit for Allstar 111025 288mhz Remote Canadian version Garage Door Opener Remote Control [RR850LM]","description":"\u003cp\u003eThe Anderic RR850LM is a substitute kit for the Allstar 111025 remote. It is a universal garage-door\/gate opener receiver add-on kit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped kit: Anderic RR850LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit replaces the Allstar radio system. It does not pair with existing 288 MHz Allstar remotes; you install the new receiver and use the kit remote.\u003c\/li\u003e\n\u003cli\u003eWiring is specific to your operator\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the RR850LM receiver first: select a location with access to the terminals and room for the antenna, attach the antenna to the receiver (TV Type F coaxial connector), fasten the receiver with the hook and loop fasteners provided, and wire it to your operator as shown in the wiring section of the RR850LM guide. Then connect power (85LM plug-in or 95LM wired-in transformer, or power from your operator).\u003c\/li\u003e\n\u003cli\u003eHold the Learn button for the receiver channel you want to use. Its LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to program.\u003c\/li\u003e\n\u003cli\u003eRelease the remote button when the receiver LED blinks and then turns off. Programming is complete.\u003c\/li\u003e\n\u003cli\u003eFor separate open, close and stop buttons: hold CH1 Learn and within 30 seconds press the OPEN button; hold CH2 Learn and press the CLOSE button; hold CH3 Learn and press the STOP button.\u003c\/li\u003e\n\u003cli\u003eIf you do not press a remote button within 30 seconds, the LED turns off; repeat the steps.\u003c\/li\u003e\n\u003cli\u003eTest the remote. Only operate the door or gate when you can see it clearly and the path is clear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR850LM kit: receiver, power supply and remote. The GUK-R keypad is not included.\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllstar 111025\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680362242359,"sku":"78400-NEW","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/allstar-111025-288mhz-remote-canadian-version-garage-door-opener-remote-control_01_72b2d76c-99b7-493a-8a4e-2c13804a82f7.jpg?v=1784913676"},{"product_id":"allstar-110995-classic-quickcode-318mhz-garage-door-opener-remote-control","title":"Anderic Substitute Kit for Allstar 110995 Classic QuickCode 318mhz Garage Door Opener Remote Control [RR850LM]","description":"\u003cp\u003eThe Anderic RR850LM is a substitute kit for the Allstar 110995 remote. It is a universal garage-door\/gate opener receiver add-on kit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped kit: Anderic RR850LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit replaces the Allstar radio system. It does not pair with existing 318 MHz Allstar remotes; you install the new receiver and use the kit remote.\u003c\/li\u003e\n\u003cli\u003eWiring is specific to your operator\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the RR850LM receiver first: select a location with access to the terminals and room for the antenna, attach the antenna to the receiver (TV Type F coaxial connector), fasten the receiver with the hook and loop fasteners provided, and wire it to your operator as shown in the wiring section of the RR850LM guide. Then connect power (85LM plug-in or 95LM wired-in transformer, or power from your operator).\u003c\/li\u003e\n\u003cli\u003eHold the Learn button for the receiver channel you want to use. Its LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to program.\u003c\/li\u003e\n\u003cli\u003eRelease the remote button when the receiver LED blinks and then turns off. Programming is complete.\u003c\/li\u003e\n\u003cli\u003eFor separate open, close and stop buttons: hold CH1 Learn and within 30 seconds press the OPEN button; hold CH2 Learn and press the CLOSE button; hold CH3 Learn and press the STOP button.\u003c\/li\u003e\n\u003cli\u003eIf you do not press a remote button within 30 seconds, the LED turns off; repeat the steps.\u003c\/li\u003e\n\u003cli\u003eTest the remote. Only operate the door or gate when you can see it clearly and the path is clear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR850LM kit: receiver, power supply and remote. The GUK-R keypad is not included.\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllstar 110995\u003c\/li\u003e\n\u003cli\u003eWorks with many Allstar garage door openers, including models such as 8822T, 8832T, 8833T and 9921MT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680365158711,"sku":"78404-NEW","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/allstar-110995-classic-quickcode-318mhz-garage-door-opener-remote-control_01_800d0beb-d6d7-42da-9cb2-06172bf04250.jpg?v=1784913680"},{"product_id":"allstar-a9921t-318mhz-binary-dip-switch-remote-garage-door-opener-remote-control","title":"Anderic Substitute Kit for Allstar A9921T 318Mhz Binary dip switch remote Garage Door Opener Remote Control [RR850LM]","description":"\u003cp\u003eThe Anderic RR850LM is a substitute kit for the Allstar A9921T remote. It is a universal garage-door\/gate opener receiver add-on kit. It works with Allstar garage door openers such as 9931.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped kit: Anderic RR850LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit replaces the Allstar radio system. It does not pair with existing 318 MHz Allstar remotes; you install the new receiver and use the kit remote.\u003c\/li\u003e\n\u003cli\u003eWiring is specific to your operator\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the RR850LM receiver first: select a location with access to the terminals and room for the antenna, attach the antenna to the receiver (TV Type F coaxial connector), fasten the receiver with the hook and loop fasteners provided, and wire it to your operator as shown in the wiring section of the RR850LM guide. Then connect power (85LM plug-in or 95LM wired-in transformer, or power from your operator).\u003c\/li\u003e\n\u003cli\u003eHold the Learn button for the receiver channel you want to use. Its LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to program.\u003c\/li\u003e\n\u003cli\u003eRelease the remote button when the receiver LED blinks and then turns off. Programming is complete.\u003c\/li\u003e\n\u003cli\u003eFor separate open, close and stop buttons: hold CH1 Learn and within 30 seconds press the OPEN button; hold CH2 Learn and press the CLOSE button; hold CH3 Learn and press the STOP button.\u003c\/li\u003e\n\u003cli\u003eIf you do not press a remote button within 30 seconds, the LED turns off; repeat the steps.\u003c\/li\u003e\n\u003cli\u003eTest the remote. Only operate the door or gate when you can see it clearly and the path is clear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR850LM kit: receiver, power supply and remote. The GUK-R keypad is not included.\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllstar A9921T\u003c\/li\u003e\n\u003cli\u003eAlso works with: 8822, 8832, 8833, 9921, and 9931.\u003c\/li\u003e\n\u003cli\u003eSupplied with: 9931\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680366534967,"sku":"78408-NEW","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/allstar-a9921t-318mhz-binary-dip-switch-remote-garage-door-opener-remote-control_01_e019cfec-b1ab-4d6e-98ae-e1ce582639b7.jpg?v=1784913685"},{"product_id":"allstar-9931t-318mhz-trinary-dip-switch-remote-garage-door-opener-remote-control","title":"Anderic Substitute Kit for Allstar 9931T 318Mhz Trinary dip switch remote Garage Door Opener Remote Control [RR850LM]","description":"\u003cp\u003eThe Anderic RR850LM is a substitute kit for the Allstar 9931T remote. It is a universal garage-door\/gate opener receiver add-on kit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped kit: Anderic RR850LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit replaces the Allstar radio system. It does not pair with existing 318 MHz Allstar remotes; you install the new receiver and use the kit remote.\u003c\/li\u003e\n\u003cli\u003eWiring is specific to your operator\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the RR850LM receiver first: select a location with access to the terminals and room for the antenna, attach the antenna to the receiver (TV Type F coaxial connector), fasten the receiver with the hook and loop fasteners provided, and wire it to your operator as shown in the wiring section of the RR850LM guide. Then connect power (85LM plug-in or 95LM wired-in transformer, or power from your operator).\u003c\/li\u003e\n\u003cli\u003eHold the Learn button for the receiver channel you want to use. Its LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to program.\u003c\/li\u003e\n\u003cli\u003eRelease the remote button when the receiver LED blinks and then turns off. Programming is complete.\u003c\/li\u003e\n\u003cli\u003eFor separate open, close and stop buttons: hold CH1 Learn and within 30 seconds press the OPEN button; hold CH2 Learn and press the CLOSE button; hold CH3 Learn and press the STOP button.\u003c\/li\u003e\n\u003cli\u003eIf you do not press a remote button within 30 seconds, the LED turns off; repeat the steps.\u003c\/li\u003e\n\u003cli\u003eTest the remote. Only operate the door or gate when you can see it clearly and the path is clear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR850LM kit: receiver, power supply and remote. The GUK-R keypad is not included.\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllstar 9931T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680368238903,"sku":"78409-NEW","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/allstar-9931t-318mhz-trinary-dip-switch-remote-garage-door-opener-remote-control_01_36b3ea66-e199-4a5e-9857-396c6d6c0630.jpg?v=1784913689"},{"product_id":"amana-ac562056-air-conditioner-remote-control","title":"Anderic Substitute for Amana AC-5620-56 Portable Air Conditioner Remote Control [RR2054]","description":"\u003cp\u003eThe Anderic RR2054 is a substitute for the Amana AC-5620-56 remote. It is a remote compatible with portable air conditioners\/dehumidifiers (no programming). It works with Amana air conditioners such as AP148D and AP148DS.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RR2054\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNo Heat mode\u003c\/li\u003e\n\u003cli\u003eCompatibility depends on the model list in the instructions\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInsert two AAA batteries, matching polarity.\u003c\/li\u003e\n\u003cli\u003eNo programming is needed; aim at the unit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR2054 remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAmana AC-5620-56\u003c\/li\u003e\n\u003cli\u003eSupplied with: AP148D, AP148DS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680393240887,"sku":"81013-NEW","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/amana-ac562056-air-conditioner-remote-control_01_941d3220-eb6e-43d8-9918-06d656090e67.jpg?v=1781725228"},{"product_id":"amazon-alexa-firestick-streaming-remote-control","title":"Anderic Substitute for Amazon Alexa Firestick Streaming Remote Control 2nd Gen PE59CV [RRF1G1]","description":"\u003cp\u003eThe Anderic RRF1G1 is a substitute for the Amazon PE59CV remote. It is a Fire TV voice remote that works in place of the old remote.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRF1G1\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eRange: stay within about 10 feet (3 m) of the Fire TV device when pairing and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck device generation\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eOn the Fire TV: Settings \u0026gt; Controllers \u0026amp; Bluetooth Devices \u0026gt; Voice Remotes with Alexa \u0026gt; Add New Remote, then press and hold HOME for 10 seconds.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf Volume, Mute or Power do not work, replace the batteries, move within 10 feet of the Fire TV, restart the Fire TV, then hold HOME for 10 seconds on the Home screen to re-pair.\u003c\/li\u003e\n\u003cli\u003eBefore pairing to a different Fire TV, reset the remote: hold LEFT, MENU and BACK together for 12 seconds, then release.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRF1G1 remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAmazon PE59CV\u003c\/li\u003e\n\u003cli\u003eSupplied with: Amazon Fire TV 3rd Gen, Amazon Fire TV Stick 2nd Gen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Substitute (RRF1G1)","offer_id":51704554651959,"sku":"199026-NEW-2","price":16.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/anderic-amazon-firestick-remote-control_9d2f0140-e1a9-4212-a291-c5f36872a99a.jpg?v=1784300584"},{"product_id":"amazon-alexa-fire-stick-2nd-gen-streaming-remote-control","title":"Anderic Substitute for Amazon L5B83H 2nd Generation Fire Stick Streaming Remote Control (Remote only) L5B83H [RRF1G1]","description":"\u003cp\u003eThe Anderic RRF1G1 is a substitute for the Amazon L5B83H remote. It is a Fire TV voice remote that works in place of the old remote.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRF1G1\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eRange: stay within about 10 feet (3 m) of the Fire TV device when pairing and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck device generation\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eOn the Fire TV: Settings \u0026gt; Controllers \u0026amp; Bluetooth Devices \u0026gt; Voice Remotes with Alexa \u0026gt; Add New Remote, then press and hold HOME for 10 seconds.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf Volume, Mute or Power do not work, replace the batteries, move within 10 feet of the Fire TV, restart the Fire TV, then hold HOME for 10 seconds on the Home screen to re-pair.\u003c\/li\u003e\n\u003cli\u003eBefore pairing to a different Fire TV, reset the remote: hold LEFT, MENU and BACK together for 12 seconds, then release.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRF1G1 remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAmazon L5B83H\u003c\/li\u003e\n\u003cli\u003eAlso works with: 1st Generation Fire Stick, 2nd Generation Fire Stick, Fire TV Stick Lite, Fire TV Stick 2020 Release, Fire TV Stick (2nd Gen), Fire TV Stick 4K, Fire TV Cube (2nd Gen), Fire TV Cube (1st Gen), and Amazon Fire TV (3rd Gen, Pendant Design).\u003c\/li\u003e\n\u003cli\u003eSupplied with: Fire TV 3rd Gen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Substitute (RRF1G1)","offer_id":51704464638263,"sku":"205933-NEW-2","price":16.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/amazon-alexa-fire-stick-2nd-gen-streaming-remote-control_01_6122e026-4b4a-4760-883c-4db69c5f1435.jpg?v=1784301803"},{"product_id":"amazon-fire-tv-alexa-voice-for-smart-tv-tv-remote-control","title":"Anderic Substitute for Amazon Fire TV Alexa Voice for Smart TV Remote Control - FireSmartTV [RRF1G1]","description":"\u003cp\u003eThe Anderic RRF1G1 is a substitute for the Amazon Alexa Voice Remote for Fire TV smart TVs remote. It is a Fire TV voice remote that works in place of the old remote.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRF1G1\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eRange: stay within about 10 feet (3 m) of the Fire TV device when pairing and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck device generation\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe may ship the newest model of this remote.\u003c\/p\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOption 1: Pairing with a Fire TV smart TV\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress HOME on your current Fire TV remote.\u003c\/li\u003e\n\u003cli\u003eGo to Settings → Controllers \u0026amp; Bluetooth Devices → Voice Remotes with Alexa → Add New Remote.\u003c\/li\u003e\n\u003cli\u003ePress and hold the HOME button on the RRF1G1 for 10 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen pairing is successful, begin using voice control. If voice control does not work, repeat the steps above.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOption 2: Pairing with a Fire TV Stick or Fire TV Cube\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnplug the power from your Fire TV device.\u003c\/li\u003e\n\u003cli\u003eWait 10 seconds, then reconnect the power.\u003c\/li\u003e\n\u003cli\u003eDo NOT press any buttons during startup.\u003c\/li\u003e\n\u003cli\u003eWait about 1 minute for the pairing screen to appear.\u003c\/li\u003e\n\u003cli\u003ePress and hold the HOME button for 10 seconds. If voice control does not work, repeat the process.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePairing additional remotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGo to Settings on your Fire TV.\u003c\/li\u003e\n\u003cli\u003eSelect Controllers \u0026amp; Bluetooth Devices.\u003c\/li\u003e\n\u003cli\u003eSelect Amazon Fire TV Remotes.\u003c\/li\u003e\n\u003cli\u003ePress and hold the HOME button for 10 seconds. If seven remotes are already paired, remove one before pairing a new remote.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTroubleshooting: Volume, Mute or Power do not work\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eReplace the batteries (alkaline recommended; batteries are not included).\u003c\/li\u003e\n\u003cli\u003eMove within 10 feet (3 meters) of the Fire TV device.\u003c\/li\u003e\n\u003cli\u003eRestart your Fire TV (unplug and reconnect power).\u003c\/li\u003e\n\u003cli\u003eOn the home screen, press and hold HOME for 10 seconds to re-pair.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFactory reset (before pairing to another device)\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and hold LEFT + MENU + BACK together for 12 seconds.\u003c\/li\u003e\n\u003cli\u003eRelease all buttons.\u003c\/li\u003e\n\u003cli\u003ePress any button. A green light shows the reset was successful. If the light does not turn green, repeat the steps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf Volume, Mute or Power do not work, replace the batteries, move within 10 feet of the Fire TV, restart the Fire TV, then hold HOME for 10 seconds on the Home screen to re-pair.\u003c\/li\u003e\n\u003cli\u003eBefore pairing to a different Fire TV, reset the remote: hold LEFT, MENU and BACK together for 12 seconds, then release.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRF1G1 remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAmazon Alexa Voice Remote for Fire TV smart TVs\u003c\/li\u003e\n\u003cli\u003eAlso works with: Fire TV 4-Series smart TVs, Fire TV Cube (3rd Gen), Fire TV Omni QLED Series, and Fire TV Omni Series.\u003c\/li\u003e\n\u003cli\u003eSupplied with: Fire TV Omni Series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Substitute (RRF1G1)","offer_id":51704590827831,"sku":"276093-NEW-2","price":16.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/FireSmartTV_9049222b-a1a0-4187-9a38-2ad365bfcf51.jpg?v=1784301528"},{"product_id":"accessmaster-371ac-1-button-visor-315-mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 371AC 1-Button Visor 315 MHz Garage Door Opener Remote Control [373LM]","description":"\u003cp\u003eThe Anderic 373LM is a substitute for the AccessMaster 371AC remote. It is a 3-button visor remote for LiftMaster Security+ purple-learn-button openers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic 373LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 315 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpener must be a compatible model\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eThe AccessMaster 371AC is a 1-button remote. This remote has 3 buttons.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePress and release the Learn key on the motor unit; do not hold it, because holding erases all codes. The learn indicator light glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the button on the remote.\u003c\/li\u003e\n\u003cli\u003eRelease the button when the motor unit light blinks; it has learned the code. If no light bulbs are installed, you will hear two clicks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic 373LM remote\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessMaster 371AC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49680416211255,"sku":"277497-NEW","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/access-master_371lm-visor-size-315mhz_2_71239a6c-237d-4d46-b69a-8839ea57d1c1.jpg?v=1784911701"},{"product_id":"amana-ac562017-air-conditioner-remote-control","title":"Anderic Substitute for Amana AC562017 Air Conditioner Remote Control [AC562030]","description":"\u003cp\u003eThe Anderic AC562030 is a substitute for the Amana AC562017 remote. It is an infrared air conditioner remote. It works with Amana air conditioners such as AC083R, AC103R and AC123R.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic AC562030\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2025 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout may differ from the original\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003ePre-programmed: no setup required, just insert batteries.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic AC562030 remote\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAmana AC562017\u003c\/li\u003e\n\u003cli\u003eWorks with many Amana air conditioners, including models starting with HWR10 and HWR12.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49683875332407,"sku":"64580-NEW","price":33.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/amana-ac562017-air-conditioner-remote-control_01.png?v=1789588420"},{"product_id":"accessmaster-373ac-3-button-vizor-315-mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 373AC 3-Button Vizor 315 MHz Garage Door Opener Remote Control [373LM]","description":"\u003cp\u003eThe Anderic 373LM is a substitute for the AccessMaster 373AC remote. It is a 3-button visor remote for LiftMaster Security+ purple-learn-button openers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic 373LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 315 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpener must be a compatible model\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePress and release the Learn key on the motor unit; do not hold it, because holding erases all codes. The learn indicator light glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the button on the remote.\u003c\/li\u003e\n\u003cli\u003eRelease the button when the motor unit light blinks; it has learned the code. If no light bulbs are installed, you will hear two clicks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic 373LM remote\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessMaster 373AC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49683886539063,"sku":"78389-NEW","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/access-master_373lm-3-button-315mhz-vizor-size_2_ac4f6f21-80b4-4012-870b-7f807aec54fe.jpg?v=1784911705"},{"product_id":"accessmaster-971lm-91lm-1-button-vizor-390mhz-garage-door-opener-remote-control","title":"Anderic Substitute for AccessMaster 971LM \/ 91LM 1-Button vizor 390MHz Garage Door Opener Remote Control [973LM]","description":"\u003cp\u003eThe Anderic 973LM is a substitute for the AccessMaster 971LM \/ 91LM remote. It is a 3-button visor garage door remote for 390 MHz Security+ openers with a red or orange Learn button. It works with AccessMaster garage door openers such as 139.53661, 139.53677SRT and 139.53661SRT.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic 973LM\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF): 390 MHz\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2032 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt works only with red or orange Learn button openers. It is not compatible with openers or remotes that use code (dip) switches, and it is not for yellow, purple or green Learn button openers\u003c\/li\u003e\n\u003cli\u003eThe AccessMaster 971LM \/ 91LM has 1 button; this remote has 3.\u003c\/li\u003e\n\u003cli\u003eKey names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eClose the garage door and stand close to the opener.\u003c\/li\u003e\n\u003cli\u003eLocate the red or orange Learn button on the garage door opener.\u003c\/li\u003e\n\u003cli\u003ePress and immediately release the Learn button. The Learn LED glows steadily for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWithin 30 seconds, press and hold the remote button you want to use.\u003c\/li\u003e\n\u003cli\u003eRelease the button when the garage door opener lights blink or two clicks are heard.\u003c\/li\u003e\n\u003cli\u003ePress the button you programmed to test it. The garage door opener activates.\u003c\/li\u003e\n\u003cli\u003eKeep the garage door clear of people and objects while programming and testing.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic 973LM remote\u003c\/li\u003e\n\u003cli\u003eVisor clip\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccessMaster 971LM \/ 91LM\u003c\/li\u003e\n\u003cli\u003eWorks with many LiftMaster, Chamberlain and Craftsman garage door openers, including models such as 950CB, 953CB, 139.53661 and 139.53677SRT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":51744899531063,"sku":"78393-NEW","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/lift971-2_2c5e6577-83e4-4ad1-80ec-b25ed949eb7e.jpg?v=1784906573"},{"product_id":"amana-ac562046-air-conditioner-remote-control","title":"Anderic Substitute for Amana AC562046 Air Conditioner Remote Control [AC562030]","description":"\u003cp\u003eThe Anderic AC562030 is a substitute for the Amana AC562046 remote. It is an infrared air conditioner remote. It works with Amana air conditioners such as ACB087R, ACC085E and ACC085R.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic AC562030\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBattery: 1 CR2025 (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLayout may differ from the original\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003ePre-programmed: no setup required, just insert batteries.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic AC562030 remote\u003c\/li\u003e\n\u003cli\u003eBattery not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAmana AC562046\u003c\/li\u003e\n\u003cli\u003eWorks with many Amana air conditioners, including models starting with ACD10, ACD12, ACC08 and ACE18.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49683944702263,"sku":"82410-NEW","price":50.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/amana-ac562046-air-conditioner-remote-control_01.png?v=1789588423"},{"product_id":"at-t-s20s1a-u-verse-cable-remote-control","title":"Anderic Substitute for AT\u0026T S20S1A U-verse Cable Remote Control [RRS30S1B]","description":"\u003cp\u003eThe Anderic RRS30S1B is a substitute for the AT\u0026amp;T S20S1A remote. It is a 4-device infrared (IR) learning remote for AT\u0026amp;T U-verse set-top boxes and is not an exact copy of the remote it replaces.\u003c\/p\u003e\n\u003ch3\u003eWhat it can do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the AT\u0026amp;T U-verse box in STB mode\u003c\/li\u003e\n\u003cli\u003ePrograms up to three more devices, such as a TV, audio system or Blu-ray player\u003c\/li\u003e\n\u003cli\u003eLearns IR codes from other remotes\u003c\/li\u003e\n\u003cli\u003eUses 2 AAA batteries, which are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow it differs from your old remote\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt is not made by AT\u0026amp;T.\u003c\/li\u003e\n\u003cli\u003eInfrared only: aim it at the box.\u003c\/li\u003e\n\u003cli\u003eTVs and other devices must be programmed with a code or by learning.\u003c\/li\u003e\n\u003cli\u003eKey names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove the battery door screw, slide the door down and insert 2 AAA batteries.\u003c\/li\u003e\n\u003cli\u003ePress STB to control the AT\u0026amp;T box.\u003c\/li\u003e\n\u003cli\u003eTo control a TV, audio or disc player, turn it on, hold that mode key about 3 seconds until its light stays on, then enter the 4-digit code from the code list.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with many AT\u0026amp;T set-top boxes, including models starting with IPN43, VIP12, ISB70 and VIP22.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Original","offer_id":50846202790199,"sku":"91907-NEW","price":37.33,"currency_code":"USD","in_stock":false},{"title":"Substitute","offer_id":50846202822967,"sku":"91907-NEW-2","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/at-t-s20s1a-u-verse-cable-remote-control_01_jpg.jpg?v=1761074852"},{"product_id":"amazon-firestick-alexa-voice-remote-only-streaming-remote-control","title":"Anderic Substitute for Amazon Fire TV Voice Remote Control (Remote Only, Fire Stick NOT Included) PE59CV [RRF1G1]","description":"\u003cp\u003eThe Anderic RRF1G1 is a substitute for the Amazon PE59CV remote. It is a Fire TV voice remote that works in place of the old remote.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRF1G1\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eRange: stay within about 10 feet (3 m) of the Fire TV device when pairing and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck device generation\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOption 1: Pairing with a Fire TV smart TV\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress HOME on your current Fire TV remote.\u003c\/li\u003e\n\u003cli\u003eGo to Settings → Controllers \u0026amp; Bluetooth Devices → Voice Remotes with Alexa → Add New Remote.\u003c\/li\u003e\n\u003cli\u003ePress and hold the HOME button on the RRF1G1 for 10 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen pairing is successful, begin using voice control. If voice control does not work, repeat the steps above.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOption 2: Pairing with a Fire TV Stick or Fire TV Cube\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnplug the power from your Fire TV device.\u003c\/li\u003e\n\u003cli\u003eWait 10 seconds, then reconnect the power.\u003c\/li\u003e\n\u003cli\u003eDo NOT press any buttons during startup.\u003c\/li\u003e\n\u003cli\u003eWait about 1 minute for the pairing screen to appear.\u003c\/li\u003e\n\u003cli\u003ePress and hold the HOME button for 10 seconds. If voice control does not work, repeat the process.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePairing additional remotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGo to Settings on your Fire TV.\u003c\/li\u003e\n\u003cli\u003eSelect Controllers \u0026amp; Bluetooth Devices.\u003c\/li\u003e\n\u003cli\u003eSelect Amazon Fire TV Remotes.\u003c\/li\u003e\n\u003cli\u003ePress and hold the HOME button for 10 seconds. If seven remotes are already paired, remove one before pairing a new remote.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTroubleshooting: Volume, Mute or Power do not work\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eReplace the batteries (alkaline recommended; batteries are not included).\u003c\/li\u003e\n\u003cli\u003eMove within 10 feet (3 meters) of the Fire TV device.\u003c\/li\u003e\n\u003cli\u003eRestart your Fire TV (unplug and reconnect power).\u003c\/li\u003e\n\u003cli\u003eOn the home screen, press and hold HOME for 10 seconds to re-pair.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFactory reset (before pairing to another device)\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and hold LEFT + MENU + BACK together for 12 seconds.\u003c\/li\u003e\n\u003cli\u003eRelease all buttons.\u003c\/li\u003e\n\u003cli\u003ePress any button. A green light shows the reset was successful. If the light does not turn green, repeat the steps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf Volume, Mute or Power do not work, replace the batteries, move within 10 feet of the Fire TV, restart the Fire TV, then hold HOME for 10 seconds on the Home screen to re-pair.\u003c\/li\u003e\n\u003cli\u003eBefore pairing to a different Fire TV, reset the remote: hold LEFT, MENU and BACK together for 12 seconds, then release.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRF1G1 remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAmazon PE59CV\u003c\/li\u003e\n\u003cli\u003eAlso works with: Amazon Fire TV 3rd Gen, Amazon Fire TV Stick 2nd Gen\u003c\/li\u003e\n\u003cli\u003eSupplied with: Fire TV Stick (1st Generation), Fire TV Stick (2nd Generation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Substitute (RRF1G1)","offer_id":51704508776759,"sku":"92358-NEW-2","price":16.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/amazon-firestick-alexa-voice-remote-only-streaming-remote-control_01_8f96020e-11ac-47c1-94ec-ac6a15c747b3.jpg?v=1784301156"},{"product_id":"at-t-s30s1b-u-verse-cable-remote-control","title":"Anderic Substitute for AT\u0026T S30S1B U-verse Cable Remote Control - 5601BC0001R [RRS30S1B]","description":"\u003cp\u003eThe Anderic RRS30S1B is a substitute for the AT\u0026amp;T S30S1B (5601BC0001R) remote. It is a 4-device infrared (IR) learning remote for AT\u0026amp;T U-verse set-top boxes and is not an exact copy of the remote it replaces.\u003c\/p\u003e\n\u003ch3\u003eWhat it can do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the AT\u0026amp;T U-verse box in STB mode\u003c\/li\u003e\n\u003cli\u003ePrograms up to three more devices, such as a TV, audio system or Blu-ray player\u003c\/li\u003e\n\u003cli\u003eLearns IR codes from other remotes\u003c\/li\u003e\n\u003cli\u003eUses 2 AAA batteries, which are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow it differs from your old remote\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt is not made by AT\u0026amp;T.\u003c\/li\u003e\n\u003cli\u003eInfrared only: aim it at the box.\u003c\/li\u003e\n\u003cli\u003eTVs and other devices must be programmed with a code or by learning.\u003c\/li\u003e\n\u003cli\u003eKey names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove the battery door screw, slide the door down and insert 2 AAA batteries.\u003c\/li\u003e\n\u003cli\u003ePress STB to control the AT\u0026amp;T box.\u003c\/li\u003e\n\u003cli\u003eTo control a TV, audio or disc player, turn it on, hold that mode key about 3 seconds until its light stays on, then enter the 4-digit code from the code list.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with many AT\u0026amp;T set-top boxes, including models starting with IPN43, VIP12, ISB70 and VIP22.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"New","offer_id":50075714945335,"sku":"204352-NEW","price":68.18,"currency_code":"USD","in_stock":false},{"title":"Refurbished","offer_id":50075714978103,"sku":"204352-REF","price":68.18,"currency_code":"USD","in_stock":false},{"title":"Substitute","offer_id":50846186930487,"sku":"204352-NEW-2","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/at-t-s30s1b-u-verse-cable-remote-control_01_jpg.jpg?v=1761075319"},{"product_id":"amazon-l5b83g-3rd-gen-4k-alexa-voice-with-tv-control-streaming-remote-control","title":"Anderic Substitute for Amazon L5B83G 3rd Gen \u0026 4k Alexa Voice with TV control Streaming Remote Control [RRF1G1]","description":"\u003cp\u003eThe Anderic RRF1G1 is a substitute for the Amazon L5B83G remote. It is a Fire TV voice remote that works in place of the old remote.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRF1G1\u003c\/li\u003e\n\u003cli\u003eRadio frequency (RF)\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eRange: stay within about 10 feet (3 m) of the Fire TV device when pairing and troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck device generation\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOption 1: Pairing with a Fire TV smart TV\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress HOME on your current Fire TV remote.\u003c\/li\u003e\n\u003cli\u003eGo to Settings → Controllers \u0026amp; Bluetooth Devices → Voice Remotes with Alexa → Add New Remote.\u003c\/li\u003e\n\u003cli\u003ePress and hold the HOME button on the RRF1G1 for 10 seconds.\u003c\/li\u003e\n\u003cli\u003eWhen pairing is successful, begin using voice control. If voice control does not work, repeat the steps above.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOption 2: Pairing with a Fire TV Stick or Fire TV Cube\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUnplug the power from your Fire TV device.\u003c\/li\u003e\n\u003cli\u003eWait 10 seconds, then reconnect the power.\u003c\/li\u003e\n\u003cli\u003eDo NOT press any buttons during startup.\u003c\/li\u003e\n\u003cli\u003eWait about 1 minute for the pairing screen to appear.\u003c\/li\u003e\n\u003cli\u003ePress and hold the HOME button for 10 seconds. If voice control does not work, repeat the process.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePairing additional remotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eGo to Settings on your Fire TV.\u003c\/li\u003e\n\u003cli\u003eSelect Controllers \u0026amp; Bluetooth Devices.\u003c\/li\u003e\n\u003cli\u003eSelect Amazon Fire TV Remotes.\u003c\/li\u003e\n\u003cli\u003ePress and hold the HOME button for 10 seconds. If seven remotes are already paired, remove one before pairing a new remote.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eTroubleshooting: Volume, Mute or Power do not work\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eReplace the batteries (alkaline recommended; batteries are not included).\u003c\/li\u003e\n\u003cli\u003eMove within 10 feet (3 meters) of the Fire TV device.\u003c\/li\u003e\n\u003cli\u003eRestart your Fire TV (unplug and reconnect power).\u003c\/li\u003e\n\u003cli\u003eOn the home screen, press and hold HOME for 10 seconds to re-pair.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eFactory reset (before pairing to another device)\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and hold LEFT + MENU + BACK together for 12 seconds.\u003c\/li\u003e\n\u003cli\u003eRelease all buttons.\u003c\/li\u003e\n\u003cli\u003ePress any button. A green light shows the reset was successful. If the light does not turn green, repeat the steps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf Volume, Mute or Power do not work, replace the batteries, move within 10 feet of the Fire TV, restart the Fire TV, then hold HOME for 10 seconds on the Home screen to re-pair.\u003c\/li\u003e\n\u003cli\u003eBefore pairing to a different Fire TV, reset the remote: hold LEFT, MENU and BACK together for 12 seconds, then release.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRF1G1 remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAmazon L5B83G\u003c\/li\u003e\n\u003cli\u003eAlso works with: Fire TV Stick 4K Max\u003c\/li\u003e\n\u003cli\u003eSupplied with: Fire TV 3rd Gen, Fire TV Cube 1st Gen, Fire TV Cube 2nd Gen, Fire TV Stick 2nd Gen, Fire TV Stick 3rd Gen, Fire TV Stick 4K, Fire TV Stick Lite, Pendant Design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Substitute (RRF1G1)","offer_id":51704411095351,"sku":"277040-NEW-2","price":16.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/amazon-l5b83g-3rd-gen-4k-alexa-voice-with-tv-control-streaming-remote-control_01_19da0de1-4b99-4e5d-8859-a84a8019321e.jpg?v=1784302018"},{"product_id":"at-t-s30-s1a-u-verse-cable-remote-control","title":"Anderic Substitute for AT\u0026T S30-S1A U-verse Cable Remote Control - S30S1A [RRS30S1B]","description":"\u003cp\u003eThe Anderic RRS30S1B is a substitute for the AT\u0026amp;T S30-S1A remote. It is a 4-device infrared (IR) learning remote for AT\u0026amp;T U-verse set-top boxes and is not an exact copy of the remote it replaces.\u003c\/p\u003e\n\u003ch3\u003eWhat it can do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with the AT\u0026amp;T U-verse box in STB mode\u003c\/li\u003e\n\u003cli\u003ePrograms up to three more devices, such as a TV, audio system or Blu-ray player\u003c\/li\u003e\n\u003cli\u003eLearns IR codes from other remotes\u003c\/li\u003e\n\u003cli\u003eUses 2 AAA batteries, which are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow it differs from your old remote\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt is not made by AT\u0026amp;T.\u003c\/li\u003e\n\u003cli\u003eInfrared only: aim it at the box.\u003c\/li\u003e\n\u003cli\u003eTVs and other devices must be programmed with a code or by learning.\u003c\/li\u003e\n\u003cli\u003eKey names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove the battery door screw, slide the door down and insert 2 AAA batteries.\u003c\/li\u003e\n\u003cli\u003ePress STB to control the AT\u0026amp;T box.\u003c\/li\u003e\n\u003cli\u003eTo control a TV, audio or disc player, turn it on, hold that mode key about 3 seconds until its light stays on, then enter the 4-digit code from the code list.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks with many AT\u0026amp;T set-top boxes, including models starting with IPN43, VIP12, ISB70 and VIP22.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Original","offer_id":50846191288631,"sku":"277619-NEW","price":36.98,"currency_code":"USD","in_stock":false},{"title":"Substitute","offer_id":50846191321399,"sku":"277619-NEW-2","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/at-t-s30-s1a-u-verse-cable-remote-control_01_jpg.jpg?v=1761075108"},{"product_id":"lg-6711a20034g-air-conditioner-remote-control","title":"Anderic Substitute for LG 6711A20034G Air Conditioner Remote Control [RR0035A]","description":"\u003cp\u003eThe Anderic RR0035A is a substitute for the LG 6711A20034G remote. It is a fixed-function air-conditioner remote (no programming). It works with air conditioners such as AGD08FA, GL6000ER and L1004R.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RR0035A\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a universal remote: only works with the AC models it is built for\u003c\/li\u003e\n\u003cli\u003eLayout may differ from the original\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInsert two AAA batteries, matching polarity.\u003c\/li\u003e\n\u003cli\u003eNo programming is needed; aim at the air conditioner.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR0035A remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLG 6711A20034G\u003c\/li\u003e\n\u003cli\u003eWorks with many LG air conditioners, including models such as 580.73083300, 580.73144300 and 580.74083400.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49692852977975,"sku":"13631-NEW","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/lg-6711a20034g-air-conditioner-remote-control_01_a0f8026e-6dda-45c5-9cd5-685a196d4f08.jpg?v=1788287437"},{"product_id":"mitsubishi-290p080a60-tv-remote-control","title":"Anderic Substitute for Mitsubishi 290P080A60 TV Remote Control [RRU401-2657]","description":"The RRU401 is the compatible replacement for the Mitsubishi 290P080A60 remote control. This universal remote consolidates control of up to four devices—TV, Blu-ray player, streaming device, soundbar, or AV receiver—into a single unit with broad compatibility across major brands. The full backlit keypad provides visibility in low light, while dedicated smart buttons for HOME, NETFLIX, and APPS deliver quick access to streaming content. Advanced learning and macro capabilities let you program custom functions or multi-device power sequences, with setup simplified by an extensive built-in code library (use code 2657 when programming for Mitsubishi TVs).","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49692865429815,"sku":"5602-NEW","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/anderic-mitsubishi-tv-remote-290p080a-x7y9z2_48fcdd70-e8c3-4b76-91b9-ce08f1fd6df3.jpg?v=1785421649"},{"product_id":"panasonic-a75c2062-air-conditioner-remote-control","title":"Anderic Substitute for Panasonic A75C2062 Air Conditioner Remote Control [RR0035A]","description":"\u003cp\u003eThe Anderic RR0035A is a substitute for the Panasonic A75C2062 remote. It is a fixed-function air-conditioner remote (no programming). It works with Panasonic air conditioners such as CWXC83YU.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RR0035A\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot a universal remote: only works with the AC models it is built for\u003c\/li\u003e\n\u003cli\u003eLayout may differ from the original\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInsert two AAA batteries, matching polarity.\u003c\/li\u003e\n\u003cli\u003eNo programming is needed; aim at the air conditioner.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RR0035A remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePanasonic A75C2062\u003c\/li\u003e\n\u003cli\u003eAlso works with: CWC60YU, CWC80YU, CWXC60YU, CWXC80YU, CWXC82YU\u003c\/li\u003e\n\u003cli\u003eSupplied with: CWXC83YU\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49692899639607,"sku":"13997-NEW","price":30.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/panasonic-a75c2062-air-conditioner-remote-control_01.png?v=1789151437"},{"product_id":"panasonic-a75c2223-air-conditioner-remote-control","title":"Anderic Substitute for Panasonic A75C2223 Air Conditioner Remote Control [KTN828]","description":"\u003cp\u003eThe Anderic KTN828 is a substitute for the Panasonic A75C2223 remote. It is a universal air-conditioner remote with a backlit LCD. It works with Panasonic air conditioners such as CSC18BKP, CSC24BKP and CSC28CKU.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic KTN828\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eWall-mount holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot ready out of the box: it must be programmed to your air conditioner (SELECT key is behind a slide-down door)\u003c\/li\u003e\n\u003cli\u003eKey layout and labels differ from the original remote\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003eFor timer and sleep operation, leave the remote stationary, aimed at the AC unit, with an unobstructed direct IR path; otherwise these functions will not work.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eInsert 2 AAA batteries (not included), matching the polarity marks. This is an infrared remote: there is no pairing; it is programmed with a code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 1, programming using code input:\u003c\/strong\u003e find the codes listed for Panasonic in the code section of the manual. For Panasonic, the codes start with 0138, then 0139, 0140, 0141.\u003c\/li\u003e\n\u003cli\u003ePress SELECT; the code section on the screen flashes.\u003c\/li\u003e\n\u003cli\u003eEnter the first 4-digit code listed for Panasonic (0138). The remote should now operate the AC. If it does not, repeat step 3 with the next code listed.\u003c\/li\u003e\n\u003cli\u003eOnce you find a working code, try the other function keys. If some keys do not respond, try a different code to see if one works more fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 2, programming using auto-search\u003c\/strong\u003e (if you do not know the brand, or the brand is not in the code table): aim the remote at your air conditioner throughout this process.\u003c\/li\u003e\n\u003cli\u003ePress and hold SELECT for 5 seconds, then release. The remote enters auto-search mode and sends codes continuously.\u003c\/li\u003e\n\u003cli\u003eWhen the AC responds, immediately press any key to save the current code.\u003c\/li\u003e\n\u003cli\u003eTry the other function keys to see if the code works fully. If it does not, repeat the auto-search steps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic KTN828 remote\u003c\/li\u003e\n\u003cli\u003eWall mount bracket\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePanasonic A75C2223\u003c\/li\u003e\n\u003cli\u003eSupplied with: CSC18BKP, CSC24BKP, CSC28CKU, CUC18BKP5, CUC18BKP6, CUC24BKP5, CUC24BKP6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49692899803447,"sku":"22269-NEW","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/panasonic-a75c2223-air-conditioner-remote-control_01.png?v=1789766453"},{"product_id":"panasonic-a75c2335-air-conditioner-remote-control","title":"Anderic Substitute for Panasonic A75C2335 Air Conditioner Remote Control [KTN828]","description":"\u003cp\u003eThe Anderic KTN828 is a substitute for the Panasonic A75C2335 remote. It is a universal air-conditioner remote with a backlit LCD. It works with Panasonic air conditioners such as CSA12CKPG and CSA9CKPG.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic KTN828\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eWall-mount holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot ready out of the box: it must be programmed to your air conditioner (SELECT key is behind a slide-down door)\u003c\/li\u003e\n\u003cli\u003eKey layout and labels differ from the original remote\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003eFor timer and sleep operation, leave the remote stationary, aimed at the AC unit, with an unobstructed direct IR path; otherwise these functions will not work.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eInsert 2 AAA batteries (not included), matching the polarity marks. This is an infrared remote: there is no pairing; it is programmed with a code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 1, programming using code input:\u003c\/strong\u003e find the codes listed for Panasonic in the code section of the manual. For Panasonic, the codes start with 0138, then 0139, 0140, 0141.\u003c\/li\u003e\n\u003cli\u003ePress SELECT; the code section on the screen flashes.\u003c\/li\u003e\n\u003cli\u003eEnter the first 4-digit code listed for Panasonic (0138). The remote should now operate the AC. If it does not, repeat step 3 with the next code listed.\u003c\/li\u003e\n\u003cli\u003eOnce you find a working code, try the other function keys. If some keys do not respond, try a different code to see if one works more fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 2, programming using auto-search\u003c\/strong\u003e (if you do not know the brand, or the brand is not in the code table): aim the remote at your air conditioner throughout this process.\u003c\/li\u003e\n\u003cli\u003ePress and hold SELECT for 5 seconds, then release. The remote enters auto-search mode and sends codes continuously.\u003c\/li\u003e\n\u003cli\u003eWhen the AC responds, immediately press any key to save the current code.\u003c\/li\u003e\n\u003cli\u003eTry the other function keys to see if the code works fully. If it does not, repeat the auto-search steps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic KTN828 remote\u003c\/li\u003e\n\u003cli\u003eWall mount bracket\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePanasonic A75C2335\u003c\/li\u003e\n\u003cli\u003eAlso works with: CSC12CKPG, CSC9CKPG, CUA12CKP6G, CUA9CKP6G, CUC12CKP6G, CUC9CKP6G\u003c\/li\u003e\n\u003cli\u003eSupplied with: CSA12CKPG, CSA9CKPG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49692899868983,"sku":"22273-NEW","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/panasonic-a75c2335-air-conditioner-remote-control_01.png?v=1789766457"},{"product_id":"panasonic-a75c2352-air-conditioner-remote-control","title":"Anderic Substitute for Panasonic A75C2352 Air Conditioner Remote Control [KTN828]","description":"\u003cp\u003eThe Anderic KTN828 is a substitute for the Panasonic A75C2352 remote. It is a universal air-conditioner remote with a backlit LCD. It works with Panasonic air conditioners such as CSA18CKPG, CSA24CKPG and CUA24CKP6G.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic KTN828\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eWall-mount holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot ready out of the box: it must be programmed to your air conditioner (SELECT key is behind a slide-down door)\u003c\/li\u003e\n\u003cli\u003eKey layout and labels differ from the original remote\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003eFor timer and sleep operation, leave the remote stationary, aimed at the AC unit, with an unobstructed direct IR path; otherwise these functions will not work.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eInsert 2 AAA batteries (not included), matching the polarity marks. This is an infrared remote: there is no pairing; it is programmed with a code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 1, programming using code input:\u003c\/strong\u003e find the codes listed for Panasonic in the code section of the manual. For Panasonic, the codes start with 0138, then 0139, 0140, 0141.\u003c\/li\u003e\n\u003cli\u003ePress SELECT; the code section on the screen flashes.\u003c\/li\u003e\n\u003cli\u003eEnter the first 4-digit code listed for Panasonic (0138). The remote should now operate the AC. If it does not, repeat step 3 with the next code listed.\u003c\/li\u003e\n\u003cli\u003eOnce you find a working code, try the other function keys. If some keys do not respond, try a different code to see if one works more fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 2, programming using auto-search\u003c\/strong\u003e (if you do not know the brand, or the brand is not in the code table): aim the remote at your air conditioner throughout this process.\u003c\/li\u003e\n\u003cli\u003ePress and hold SELECT for 5 seconds, then release. The remote enters auto-search mode and sends codes continuously.\u003c\/li\u003e\n\u003cli\u003eWhen the AC responds, immediately press any key to save the current code.\u003c\/li\u003e\n\u003cli\u003eTry the other function keys to see if the code works fully. If it does not, repeat the auto-search steps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic KTN828 remote\u003c\/li\u003e\n\u003cli\u003eWall mount holder\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePanasonic A75C2352\u003c\/li\u003e\n\u003cli\u003eSupplied with: CSA18CKPG, CSA24CKPG, CUA24CKP6G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49692900000055,"sku":"22274-NEW","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/panasonic-a75c2352-air-conditioner-remote-control_01.png?v=1789766461"},{"product_id":"panasonic-a75c561-air-conditioner-remote-control","title":"Anderic Substitute for Panasonic A75C561 Air Conditioner Remote Control [KTN828]","description":"\u003cp\u003eThe Anderic KTN828 is a substitute for the Panasonic A75C561 remote. It is a universal air-conditioner remote with a backlit LCD. It works with Panasonic air conditioners such as CSXC181KP and CSXC241KP.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic KTN828\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eWall-mount holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot ready out of the box: it must be programmed to your air conditioner (SELECT key is behind a slide-down door)\u003c\/li\u003e\n\u003cli\u003eKey layout and labels differ from the original remote\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003eFor timer and sleep operation, leave the remote stationary, aimed at the AC unit, with an unobstructed direct IR path; otherwise these functions will not work.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eInsert 2 AAA batteries (not included), matching the polarity marks. This is an infrared remote: there is no pairing; it is programmed with a code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 1, programming using code input:\u003c\/strong\u003e find the codes listed for Panasonic in the code section of the manual. For Panasonic, the codes start with 0138, then 0139, 0140, 0141.\u003c\/li\u003e\n\u003cli\u003ePress SELECT; the code section on the screen flashes.\u003c\/li\u003e\n\u003cli\u003eEnter the first 4-digit code listed for Panasonic (0138). The remote should now operate the AC. If it does not, repeat step 3 with the next code listed.\u003c\/li\u003e\n\u003cli\u003eOnce you find a working code, try the other function keys. If some keys do not respond, try a different code to see if one works more fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 2, programming using auto-search\u003c\/strong\u003e (if you do not know the brand, or the brand is not in the code table): aim the remote at your air conditioner throughout this process.\u003c\/li\u003e\n\u003cli\u003ePress and hold SELECT for 5 seconds, then release. The remote enters auto-search mode and sends codes continuously.\u003c\/li\u003e\n\u003cli\u003eWhen the AC responds, immediately press any key to save the current code.\u003c\/li\u003e\n\u003cli\u003eTry the other function keys to see if the code works fully. If it does not, repeat the auto-search steps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic KTN828 remote\u003c\/li\u003e\n\u003cli\u003eWall mount holder\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePanasonic A75C561\u003c\/li\u003e\n\u003cli\u003eAlso works with: CS1200KP, CS2400KP\u003c\/li\u003e\n\u003cli\u003eSupplied with: CSXC181KP, CSXC241KP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49692900131127,"sku":"22278-NEW","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/panasonic-a75c561-air-conditioner-remote-control_01.png?v=1789766465"},{"product_id":"panasonic-cwa75c2065-air-conditioner-remote-control","title":"Anderic Substitute for Panasonic CWA75C2065 Air Conditioner Remote Control [KTN828]","description":"\u003cp\u003eThe Anderic KTN828 is a substitute for the Panasonic CWA75C2065 remote. It is a universal air-conditioner remote with a backlit LCD. It works with Panasonic air conditioners such as CWXC100, CWXC100AU and CWXC103VU.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic KTN828\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eWall-mount holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot ready out of the box: it must be programmed to your air conditioner (SELECT key is behind a slide-down door)\u003c\/li\u003e\n\u003cli\u003eKey layout and labels differ from the original remote\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003eFor timer and sleep operation, leave the remote stationary, aimed at the AC unit, with an unobstructed direct IR path; otherwise these functions will not work.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eInsert 2 AAA batteries (not included), matching the polarity marks. This is an infrared remote: there is no pairing; it is programmed with a code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 1, programming using code input:\u003c\/strong\u003e find the codes listed for Panasonic in the code section of the manual. For Panasonic, the codes start with 0138, then 0139, 0140, 0141.\u003c\/li\u003e\n\u003cli\u003ePress SELECT; the code section on the screen flashes.\u003c\/li\u003e\n\u003cli\u003eEnter the first 4-digit code listed for Panasonic (0138). The remote should now operate the AC. If it does not, repeat step 3 with the next code listed.\u003c\/li\u003e\n\u003cli\u003eOnce you find a working code, try the other function keys. If some keys do not respond, try a different code to see if one works more fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 2, programming using auto-search\u003c\/strong\u003e (if you do not know the brand, or the brand is not in the code table): aim the remote at your air conditioner throughout this process.\u003c\/li\u003e\n\u003cli\u003ePress and hold SELECT for 5 seconds, then release. The remote enters auto-search mode and sends codes continuously.\u003c\/li\u003e\n\u003cli\u003eWhen the AC responds, immediately press any key to save the current code.\u003c\/li\u003e\n\u003cli\u003eTry the other function keys to see if the code works fully. If it does not, repeat the auto-search steps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic KTN828 remote\u003c\/li\u003e\n\u003cli\u003eWall mount bracket\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePanasonic CWA75C2065\u003c\/li\u003e\n\u003cli\u003eWorks with many Panasonic air conditioners, including models starting with CWXC10 and CWXC12.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49692900688183,"sku":"8104-NEW","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/panasonic-cwa75c2065-air-conditioner-remote-control_01.png?v=1789766470"},{"product_id":"panasonic-cwa75c2297-air-conditioner-remote-control","title":"Anderic Substitute for Panasonic CWA75C2297 Air Conditioner Remote Control [KTN828]","description":"\u003cp\u003eThe Anderic KTN828 is a substitute for the Panasonic CWA75C2297 remote. It is a universal air-conditioner remote with a backlit LCD. It works with Panasonic air conditioners such as CSA12CKPG, CSA9CKPG and CSC12CKPG.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic KTN828\u003c\/li\u003e\n\u003cli\u003eInfrared (IR): aim it at the device; a clear line of sight is needed\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eWall-mount holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNot ready out of the box: it must be programmed to your air conditioner (SELECT key is behind a slide-down door)\u003c\/li\u003e\n\u003cli\u003eKey layout and labels differ from the original remote\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003eFor timer and sleep operation, leave the remote stationary, aimed at the AC unit, with an unobstructed direct IR path; otherwise these functions will not work.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eInsert 2 AAA batteries (not included), matching the polarity marks. This is an infrared remote: there is no pairing; it is programmed with a code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 1, programming using code input:\u003c\/strong\u003e find the codes listed for Panasonic in the code section of the manual. For Panasonic, the codes start with 0138, then 0139, 0140, 0141.\u003c\/li\u003e\n\u003cli\u003ePress SELECT; the code section on the screen flashes.\u003c\/li\u003e\n\u003cli\u003eEnter the first 4-digit code listed for Panasonic (0138). The remote should now operate the AC. If it does not, repeat step 3 with the next code listed.\u003c\/li\u003e\n\u003cli\u003eOnce you find a working code, try the other function keys. If some keys do not respond, try a different code to see if one works more fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod 2, programming using auto-search\u003c\/strong\u003e (if you do not know the brand, or the brand is not in the code table): aim the remote at your air conditioner throughout this process.\u003c\/li\u003e\n\u003cli\u003ePress and hold SELECT for 5 seconds, then release. The remote enters auto-search mode and sends codes continuously.\u003c\/li\u003e\n\u003cli\u003eWhen the AC responds, immediately press any key to save the current code.\u003c\/li\u003e\n\u003cli\u003eTry the other function keys to see if the code works fully. If it does not, repeat the auto-search steps.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic KTN828 remote\u003c\/li\u003e\n\u003cli\u003eWall mount holder\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePanasonic CWA75C2297\u003c\/li\u003e\n\u003cli\u003eSupplied with: CSA12CKPG, CSA9CKPG, CSC12CKPG, CSC9CKPG, CUA12CKP6G, CUA9CKP6G, CUC12CKP6G, CUC9CKP6G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49692900852023,"sku":"22272-NEW","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/panasonic-cwa75c2297-air-conditioner-remote-control_01.png?v=1789766473"},{"product_id":"philips-tsu500-01-advanced-universal-remote-control","title":"Anderic Substitute for Philips TSU500\/01 Advanced Universal Remote Control [RRU401]","description":"\u003cp\u003eThe Anderic RRU401 is a substitute for the Philips TSU500\/01. It is a 4-device infrared (IR) universal remote with learning, macros and backlighting.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRU401\u003c\/li\u003e\n\u003cli\u003eInfrared (IR); point it at the device\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eBattery door: secured with a screw\u003c\/li\u003e\n\u003cli\u003eBacklit keypad with adjustable on time (3 to 10 seconds) and brightness\u003c\/li\u003e\n\u003cli\u003eLearning: copies individual keys from your old remote, one key at a time\u003c\/li\u003e\n\u003cli\u003eMacros: up to 5 macro keys with up to 15 steps each, plus combined power to switch several devices on or off with one press\u003c\/li\u003e\n\u003cli\u003eCode display reads back a saved code; volume, channel and media punch-through and a device mode lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt is a button remote with IR only; features specific to the old remote, such as any display, RF or PC programming, are not included.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Dish Hopper 3, Roku sticks or Roku TVs without an IR receiver, or Fire TV Stick; DirecTV boxes must be set to IR mode.\u003c\/li\u003e\n\u003cli\u003eKey names, layout and the look of the case may differ from the original. Compare your original's buttons before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003cp\u003eBatteries are not included. Not compatible with Dish Hopper 3, Roku Streaming Sticks or Roku TVs without an IR receiver, or the Amazon Fire TV Stick. DirecTV boxes must be set to IR mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling the batteries\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eRemove the screw with a Phillips screwdriver, then slide the battery door down toward the bottom.\u003c\/li\u003e\n\u003cli\u003eInsert 2 AAA batteries, matching polarity.\u003c\/li\u003e\n\u003cli\u003eReplace the battery door and screw.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCode input method\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTurn on the device you want to control.\u003c\/li\u003e\n\u003cli\u003eFind your TV brand's 4-digit code in the RRU401 code list.\u003c\/li\u003e\n\u003cli\u003ePress and hold the mode key (for example TV) for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003eKey in the 4-digit code. If valid, the mode light turns off immediately. If invalid, it blinks three times rapidly and turns off; try again.\u003c\/li\u003e\n\u003cli\u003eCheck that most keys work. If not, try another code for the same brand, or use a search method below. The remote exits programming after 20 seconds with no key press.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAuto code search\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTurn on the device.\u003c\/li\u003e\n\u003cli\u003ePress and hold the mode key for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003ePress and release CH+ or CH− to scan forward or backward.\u003c\/li\u003e\n\u003cli\u003eWhen the device powers off (or video starts playing), press POWER to save and exit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOne-button search (TV and Cable\/STB only)\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePower on the device.\u003c\/li\u003e\n\u003cli\u003ePress and release the mode key.\u003c\/li\u003e\n\u003cli\u003ePress and hold the number key for your brand (see the brand list in the guide) until the device powers off, then release. After 3 seconds the mode light goes out and then flashes about once per second while searching.\u003c\/li\u003e\n\u003cli\u003eCheck that most keys work; if not, repeat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCode display\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and release the mode key.\u003c\/li\u003e\n\u003cli\u003ePress MENU and 1; count the mode key flashes for the first digit. Repeat with MENU and 2, 3 and 4. No flash means 0.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eLearning\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and hold the mode key for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003ePress and release MENU; the mode key blinks slowly (learning mode).\u003c\/li\u003e\n\u003cli\u003ePress and release the key you want to learn; the mode light stays on.\u003c\/li\u003e\n\u003cli\u003ePoint the remotes at each other about 2 inches apart, with the IR LEDs aligned.\u003c\/li\u003e\n\u003cli\u003ePress and hold the matching key on the old remote until the mode light blinks three times, then flashes slowly (learned). If it flashes twice quickly, learning failed (memory may be full); delete some learned keys and start again.\u003c\/li\u003e\n\u003cli\u003eRepeat steps 3–5, then press the mode key to save and exit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eDelete all learned keys (all devices)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHold any mode key about 3 seconds until the light stays on, release, then key in 9 9 8 8. The mode light blinks twice slowly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReset to factory default\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHold any mode key about 3 seconds until the light stays on, release, then key in 9 9 9 9. All mode lights stay lit for about 3 seconds, then turn off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTroubleshooting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf all mode keys blink together when you press buttons and the remote does not respond, replace the batteries.\u003c\/p\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf all the mode keys blink together when you press a button and the remote does not respond, the batteries are weak; replace them.\u003c\/li\u003e\n\u003cli\u003eFor a DirecTV box, set the box to IR mode first (Menu \u0026gt; Settings \u0026amp; Help \u0026gt; Settings \u0026gt; Remote Control).\u003c\/li\u003e\n\u003cli\u003eTo start over, reset the remote: hold any mode key until its light stays on, then enter 9 9 9 9.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRU401 universal remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePhilips TSU500\/01\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49693045489975,"sku":"8311-NEW","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/philips-tsu500-01-advanced-universal-remote-control_01_af27a26f-b02e-4b34-a070-d35148343e3b.jpg?v=1785421654"},{"product_id":"rca-rcr311w-3-device-universal-remote-control","title":"Anderic Substitute for RCA RCR311W 3-Device Universal Remote Control [RRU401]","description":"\u003cp\u003eThe Anderic RRU401 is a substitute for the RCA RCR311W remote. It is a 4-device universal remote (such as TVs, streaming players, DVD\/Blu-ray players and soundbars) with a backlit keypad, learning and macros.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRU401\u003c\/li\u003e\n\u003cli\u003eInfrared (IR); point it at the device\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eBattery door: secured with a screw\u003c\/li\u003e\n\u003cli\u003eBacklit keypad with adjustable on time (3 to 10 seconds) and brightness\u003c\/li\u003e\n\u003cli\u003eLearning: copies individual keys from your old remote, one key at a time\u003c\/li\u003e\n\u003cli\u003eMacros: up to 5 macro keys with up to 15 steps each, plus combined power to switch several devices on or off with one press\u003c\/li\u003e\n\u003cli\u003eCode display reads back a saved code; volume, channel and media punch-through and a device mode lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe remote it replaces controls 3 devices. This remote controls up to 4.\u003c\/li\u003e\n\u003cli\u003eIt is not pre-set. You program it with a brand code, a code search or learning before it controls your equipment.\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Roku Streaming Sticks, Roku TVs without an IR receiver, Amazon Fire TV Stick or Dish Hopper 3. On other Roku devices the number keys do not work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn on the device you want to control.\u003c\/li\u003e\n\u003cli\u003ePress and hold its mode key (for example TV) for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003eEnter the 4-digit code for your brand. The mode light turns off if the code is valid; three quick blinks means it is not.\u003c\/li\u003e\n\u003cli\u003eTest the keys. If most do not work, repeat with another code for the same brand or use the auto code search.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf all the mode keys blink together when you press a button and the remote does not respond, the batteries are weak; replace them.\u003c\/li\u003e\n\u003cli\u003eFor a DirecTV box, set the box to IR mode first (Menu \u0026gt; Settings \u0026amp; Help \u0026gt; Settings \u0026gt; Remote Control).\u003c\/li\u003e\n\u003cli\u003eTo start over, reset the remote: hold any mode key until its light stays on, then enter 9 9 9 9.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRU401 universal remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRCA RCR311W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49693131079991,"sku":"6112-NEW","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/rca-rcr311w-3-device-universal-remote-control_01_dcc1a61b-88f5-45d3-b9bb-dea1c407b03e.jpg?v=1785421658"},{"product_id":"rca-rcr615tfm1-advanced-universal-remote-control","title":"Anderic Substitute for RCA RCR615TFM1 Advanced Universal Remote Control [RRU401]","description":"\u003cp\u003eThe Anderic RRU401 is a substitute for the RCA RCR615TFM1 remote. It is a 4-device universal remote (such as TVs, streaming players, DVD\/Blu-ray players and soundbars) with a backlit keypad, learning and macros.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRU401\u003c\/li\u003e\n\u003cli\u003eInfrared (IR); point it at the device\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eBattery door: secured with a screw\u003c\/li\u003e\n\u003cli\u003eBacklit keypad with adjustable on time (3 to 10 seconds) and brightness\u003c\/li\u003e\n\u003cli\u003eLearning: copies individual keys from your old remote, one key at a time\u003c\/li\u003e\n\u003cli\u003eMacros: up to 5 macro keys with up to 15 steps each, plus combined power to switch several devices on or off with one press\u003c\/li\u003e\n\u003cli\u003eCode display reads back a saved code; volume, channel and media punch-through and a device mode lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCheck how many devices your old remote controls. This remote controls up to 4.\u003c\/li\u003e\n\u003cli\u003eIt is not pre-set. You program it with a brand code, a code search or learning before it controls your equipment.\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Roku Streaming Sticks, Roku TVs without an IR receiver, Amazon Fire TV Stick or Dish Hopper 3. On other Roku devices the number keys do not work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn on the device you want to control.\u003c\/li\u003e\n\u003cli\u003ePress and hold its mode key (for example TV) for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003eEnter the 4-digit code for your brand. The mode light turns off if the code is valid; three quick blinks means it is not.\u003c\/li\u003e\n\u003cli\u003eTest the keys. If most do not work, repeat with another code for the same brand or use the auto code search.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf all the mode keys blink together when you press a button and the remote does not respond, the batteries are weak; replace them.\u003c\/li\u003e\n\u003cli\u003eFor a DirecTV box, set the box to IR mode first (Menu \u0026gt; Settings \u0026amp; Help \u0026gt; Settings \u0026gt; Remote Control).\u003c\/li\u003e\n\u003cli\u003eTo start over, reset the remote: hold any mode key until its light stays on, then enter 9 9 9 9.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRU401 universal remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRCA RCR615TFM1\u003c\/li\u003e\n\u003cli\u003eWorks with many RCA devices, including models such as 32F650, 32F650T and 32F650TYX1LWP.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to the full compatible models list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49693131604279,"sku":"17653-NEW","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/rca-rcr615tfm1-advanced-universal-remote-control_01_b182c876-f73e-4652-8253-67be46454946.jpg?v=1785421663"},{"product_id":"rca-rcu300t-3-device-universal-remote-control","title":"Anderic Substitute for RCA RCU300T 3-Device Universal Remote Control [RRU401]","description":"\u003cp\u003eThe Anderic RRU401 is a substitute for the RCA RCU300T remote. It is a 4-device universal remote (such as TVs, streaming players, DVD\/Blu-ray players and soundbars) with a backlit keypad, learning and macros.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRU401\u003c\/li\u003e\n\u003cli\u003eInfrared (IR); point it at the device\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eBattery door: secured with a screw\u003c\/li\u003e\n\u003cli\u003eBacklit keypad with adjustable on time (3 to 10 seconds) and brightness\u003c\/li\u003e\n\u003cli\u003eLearning: copies individual keys from your old remote, one key at a time\u003c\/li\u003e\n\u003cli\u003eMacros: up to 5 macro keys with up to 15 steps each, plus combined power to switch several devices on or off with one press\u003c\/li\u003e\n\u003cli\u003eCode display reads back a saved code; volume, channel and media punch-through and a device mode lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe remote it replaces controls 3 devices. This remote controls up to 4.\u003c\/li\u003e\n\u003cli\u003eIt is not pre-set. You program it with a brand code, a code search or learning before it controls your equipment.\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Roku Streaming Sticks, Roku TVs without an IR receiver, Amazon Fire TV Stick or Dish Hopper 3. On other Roku devices the number keys do not work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn on the device you want to control.\u003c\/li\u003e\n\u003cli\u003ePress and hold its mode key (for example TV) for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003eEnter the 4-digit code for your brand. The mode light turns off if the code is valid; three quick blinks means it is not.\u003c\/li\u003e\n\u003cli\u003eTest the keys. If most do not work, repeat with another code for the same brand or use the auto code search.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf all the mode keys blink together when you press a button and the remote does not respond, the batteries are weak; replace them.\u003c\/li\u003e\n\u003cli\u003eFor a DirecTV box, set the box to IR mode first (Menu \u0026gt; Settings \u0026amp; Help \u0026gt; Settings \u0026gt; Remote Control).\u003c\/li\u003e\n\u003cli\u003eTo start over, reset the remote: hold any mode key until its light stays on, then enter 9 9 9 9.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRU401 universal remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRCA RCU300T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49693134225719,"sku":"5484-NEW","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/rca_rcu300t_2_52df4129-8ad0-477b-8b3f-ac556e099676.jpg?v=1785421667"},{"product_id":"rca-rcu300wbl-3-device-universal-remote-control","title":"Anderic Substitute for RCA RCU300WBL 3-Device Universal Remote Control [RRU401]","description":"\u003cp\u003eThe Anderic RRU401 is a substitute for the RCA RCU300WBL remote. It is a 4-device universal remote (such as TVs, streaming players, DVD\/Blu-ray players and soundbars) with a backlit keypad, learning and macros.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShipped remote: Anderic RRU401\u003c\/li\u003e\n\u003cli\u003eInfrared (IR); point it at the device\u003c\/li\u003e\n\u003cli\u003eBatteries: 2 AAA (not included)\u003c\/li\u003e\n\u003cli\u003eBattery door: secured with a screw\u003c\/li\u003e\n\u003cli\u003eBacklit keypad with adjustable on time (3 to 10 seconds) and brightness\u003c\/li\u003e\n\u003cli\u003eLearning: copies individual keys from your old remote, one key at a time\u003c\/li\u003e\n\u003cli\u003eMacros: up to 5 macro keys with up to 15 steps each, plus combined power to switch several devices on or off with one press\u003c\/li\u003e\n\u003cli\u003eCode display reads back a saved code; volume, channel and media punch-through and a device mode lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to Know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe remote it replaces controls 3 devices. This remote controls up to 4.\u003c\/li\u003e\n\u003cli\u003eIt is not pre-set. You program it with a brand code, a code search or learning before it controls your equipment.\u003c\/li\u003e\n\u003cli\u003eKey names and layout may differ from the original.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Roku Streaming Sticks, Roku TVs without an IR receiver, Amazon Fire TV Stick or Dish Hopper 3. On other Roku devices the number keys do not work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup \/ Pairing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eTurn on the device you want to control.\u003c\/li\u003e\n\u003cli\u003ePress and hold its mode key (for example TV) for about 3 seconds until the mode light stays on, then release.\u003c\/li\u003e\n\u003cli\u003eEnter the 4-digit code for your brand. The mode light turns off if the code is valid; three quick blinks means it is not.\u003c\/li\u003e\n\u003cli\u003eTest the keys. If most do not work, repeat with another code for the same brand or use the auto code search.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIf all the mode keys blink together when you press a button and the remote does not respond, the batteries are weak; replace them.\u003c\/li\u003e\n\u003cli\u003eFor a DirecTV box, set the box to IR mode first (Menu \u0026gt; Settings \u0026amp; Help \u0026gt; Settings \u0026gt; Remote Control).\u003c\/li\u003e\n\u003cli\u003eTo start over, reset the remote: hold any mode key until its light stays on, then enter 9 9 9 9.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Anderic RRU401 universal remote\u003c\/li\u003e\n\u003cli\u003eBatteries not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRCA RCU300WBL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBefore ordering, check the model or part number printed on your old remote (usually on the back or inside the battery compartment) and compare it to this list.\u003c\/p\u003e","brand":"Anderic","offers":[{"title":"Default Title","offer_id":49693135208759,"sku":"5454-NEW","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/7634\/0279\/files\/rca-rcu300wbl-3-device-universal-remote-control_01_72d2f27c-820b-455b-aa45-f16a1d9b1448.jpg?v=1785421672"}],"url":"https:\/\/www.anderic.com\/collections\/anderic-substitute-products.oembed?page=82","provider":"Anderic","version":"1.0","type":"link"}